DHCP Jumpstart 问题请教

fg008

准备用jumpstart 和DHCP 为X86 机器安装系统。
由于可用ip 地址有限，希望能通过DHCP分配为指定的机器分配指定的ip地址，请问如何解决？谢谢

fg008

Target host:
指定Ip address : 10.86.114.141
Netmask 255.255.255.224
Network address: 10.86.114.128

我们的系统没有图形界面，需要用命令行

haishui

http://blog.chinaunix.net/u/31839/showart_504626.html
看看这个文章，里面有图示的，还是很详细的。

hexilanlan

fg008

谢谢，这个问题现在解决了，又有新问题了

JumpStart Server的服务器网络端口分了不少Vlan:
客户机连载 e1000g128000端口,但是add_install_client的时候 BootSrvA IP不对
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index         
        inet 127.0.0.1 netmask ff000000
e1000g16000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500     
        inet 10.86.114.27 netmask fffffff0 broadcast 10.86.114.31
        ether 0:23:8b:57:4e:5c
e1000g32000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500     
        inet 10.86.114.38 netmask ffffffe0 broadcast 10.86.114.63
        ether 0:23:8b:57:4e:5c
e1000g96000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
        inet 10.86.114.105 netmask ffffffe0 broadcast 10.86.114.127
        ether 0:23:8b:57:4e:5c
e1000g96001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
        inet 10.86.110.108 netmask ffffffe0 broadcast 10.86.110.127
        ether 0:23:8b:57:4e:5d
e1000g128000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
        inet 10.86.114.140 netmask ffffffe0 broadcast 10.86.114.159
        ether 0:23:8b:57:4e:5c
e1000g128001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500
        inet 10.86.110.135 netmask ffffffe0 broadcast 10.86.110.159
        ether 0:23:8b:57:4e:5d

fg008

If not already configured, enable PXE boot by creating
a macro named 0100269ECDBFF0 with:
  Boot server IP (BootSrvA) : 10.86.114.27
  Boot file      (BootFile) : 0100269ECDBFF0

fg008

为什么地址是10.86.114.27