HP J6700能安装hp-ux 10.20的系统吗？谢谢

zljuser

谢谢
我安装11i v1可以用，但是10.20的不可以，不知原因,有以下日志

BOOTABLE DEVICE FOUND:
   Path Number        Device Path              Device Type and Utilities
   -----------        -----------------        -------------------------
   P0                 IDE                      UJDA750 DVD/CDRW        
                                               IPL

Booting...
Boot IO Dependent Code (IODC) revision 0


HARD Booted.

ISL Revision A.00.38  OCT 26, 1994

ISL booting  hpux (;0):INSTALL

Boot
: disk(10/0/14/0.1.0.0.0.0.0;0):INSTALL
4082084 + 376832 + 328000 start 0x1942e8



Stored message buffer up to panic:

System Panic:
   B2352B HP-UX (B.10.20) #1: Sun Jun  9 08:03:38 PDT 1996
panic: (display==0xb800, flags==0x0) set_machine_parameters: Unidentified cpu type returned from PDC_MODEL

PC-Offset Stack Trace (read across, most recent is 1st):
  0x0022baf4  0x0017d2c4  0x0015ede0  0x001944b0
End Of Stack
It was not possible for the kernel to find a process
that caused this crash.


Dumpsys() called

WARNING: Early dump not configured; ** contact your HP support representative **
WARNING: Can't initialize dump device

Dumpsys() failed, returned 4294967295

zljuser

BOOTABLE DEVICE FOUND:
   Path Number        Device Path              Device Type and Utilities
   -----------        -----------------        -------------------------
   P0                 IDE                      UJDA750 DVD/CDRW        
                                               IPL

Booting...
Boot IO Dependent Code (IODC) revision 0


HARD Booted.

ISL Revision A.00.38  OCT 26, 1994

ISL booting  hpux (;0):INSTALL

Boot
: disk(10/0/14/0.1.0.0.0.0.0;0):INSTALL
4082084 + 376832 + 328000 start 0x1942e8



Stored message buffer up to panic:

System Panic:
   B2352B HP-UX (B.10.20) #1: Sun Jun  9 08:03:38 PDT 1996
panic: (display==0xb800, flags==0x0) set_machine_parameters: Unidentified cpu type returned from PDC_MODEL

PC-Offset Stack Trace (read across, most recent is 1st):
  0x0022baf4  0x0017d2c4  0x0015ede0  0x001944b0
End Of Stack
It was not possible for the kernel to find a process
that caused this crash.


Dumpsys() called

WARNING: Early dump not configured; ** contact your HP support representative **
WARNING: Can't initialize dump device

Dumpsys() failed, returned 4294967295

swallowcn

可以负责任的告诉你,J6700不能装hp-ux 10.20!

能装hp-ux 10.20的机器哪么多,你为什么一定要拿j6700来试验呢!

zljuser

rp3410 可以吗

swallowcn

大哥,你为什么不通换个方向选型号,你来个RP3410,哪就更不行了!

逗我玩是吧?

michael1983

os不支持那个版本的CPU？

easybegin

凡是CPU体系机构属于8700的，10.20都不能装。