rx7620无法加电，麻烦熟悉7620的哥们看一眼

easybegin

mp] MP:CM> pe

This command controls power enable to a hardware device.

    T - Cabinet
    C - Cell
    D - DVD/Tape
    P - IO Chassis
    R - Partition
        Select Device: r


  Part#  Name
  -----  ----
     0)  Partition 0

    Select a partition number: 0

    The power state is OFF for Partition 0.
    In what state do you want the power? (ON/OFF) on


Error attempting to power ON : RtnCodeCellSlotPowered

easybegin

好像是有一路电有问题

Delbert.Ma

能否贴出如下命令的输出：

ps

cp

sysrev

easybegin

回复 3# Delbert.Ma


    今天不行了，电源线被人拿走了。

leelangco

这个报错很麻烦
我遇见很多次了，有时需要等上几个小时，最后CELL自己加上电了
也有可能是CELL板不好

easybegin

回复 3# Delbert.Ma


    mp] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*  *|*  *|  *  | * * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device:

hp-ux民工

贴日志
你这谁能说清呀

hp-ux民工

ps所有的设备
sl日志

leelangco

没有用的
我敢保证日志里啥报错都没有

RP/RX 7XXX/8XXX都有这个毛病

楼主慢慢等吧

easybegin

[mp] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*  *|*  *|  *  | *   | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: t

HW status for rx7620 cabinet : NO FAILURE DETECTED

Power switch is on
Right Door is closed
Top Door is closed
Left Door is closed

Total Power Available 7200 VA
Total Power Needed 1282 VA
Power Redundancy : redundant
Power Viability : viable


Power Status
---------------+-----+-----+-------+-----+
               |     |     |       |     |
               | Sys |     |  IO   |     |
               |Bkpln|Cells|Chassis| BPS |
               |     | 0 1 | 0   1 | 0 1 |
---------------+-----+-----+-------+-----+
Populated     |  *  | *   | *   * | * * |
Enabled       |  *  |     | *     | * * |
Power OK      |  *  |     | *     | * * |
Warning/Fault |     |     |       |     |
Attention LED |     |     |       |     |


AC Line status:
  Line A0 Present
  Line A1 Present
  Line B0 Present
  Line B1 Present

               -- Press <CR> to continue, or 'Q' to Quit --

Front Fan Speed   : normal
Rear Fan speed    : normal
I/O Bay Fan Speed : normal
Temperature state : normal
Main Fan Redundancy   : redundant
I/O Fan Redundancy    : redundant
Overtemp Shutdown Enabled


            | BPS |     PCI     |
            | Fans|     Fans    |
            | 0 1 | 0 1 2 3 4 5 |
+-----------+-----+-------------+
  Populated | * * | * * * * * * |
  Failing   |     |             |
  Failed    |     |             |

            | Standby/Main Fans |
            |                   |
            | 0 1 2 3           |
+-----------+-------------------+
  Populated | * * * *           |
  Failing   |                   |
  Failed    |                   |

            |  Cell Fans |
            |   CPU    C |
            | 0 1 2 3  C |
+-----------+------------+
Cell 0     |            |
  Populated | *   *    * |
  Failing   |            |
  Failed    |          * |

[mp] MP:CM>





是不是风扇？ 哪个风扇？