免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 4457 | 回复: 11

v445 加电报错 [复制链接]

论坛徽章:
0
发表于 2010-09-20 17:11 |显示全部楼层
sc> bootmode
Bootmode: normal
sc> poweron
sc>
SC Alert: PSU @ PS0 has FAILED.

SC Alert: PSU @ PS1 has FAILED.

SC Alert: PSU @ PS2 has FAILED.

SC Alert: PSU @ PS3 has FAILED.

sc>
sc> showenvironment


=============== Environmental Status ===============


--------------------------------------------------------------------------------
System Temperatures (Temperatures in Celsius):
--------------------------------------------------------------------------------
Sensor         Status    Temp LowHard LowSoft LowWarn HighWarn HighSoft HighHard
--------------------------------------------------------------------------------
CPU temperature information cannot be displayed when System power is off.
FIRE I/O temperature information cannot be displayed when System power is off.
MB.IO_T_AMB     OK         29    -20     -10       0      70       75       82
FIOB.T_AMB      OK         25    -20     -10       0      47       52       59
MB.T_AMB        OK         27    -20     -10       0      70       75       82

--------------------------------------
Keyswitch:
--------------------------------------
Keyswitch position: NORMAL

--------------------------------------------------------
System Indicator Status:
--------------------------------------------------------
SYS.LOCATE           SYS.SERVICE          SYS.ACT            
--------------------------------------------------------
OFF                  ON                   STANDBY BLINK      

--------------------------------------------------------
SYS.PSFAIL           SYS.OVERTEMP         SYS.FANFAIL         
ON                   OFF                  OFF                 


Disk Status information cannot be displayed when System power is off.

Fan Status information cannot be displayed when System power is off.

Voltage Rail Status information cannot be displayed when System power is off.

--------------------------------------------
Power Supply Indicators:
--------------------------------------------
Supply    Active   Standby  Service
--------------------------------------------
PS0       ON       ON       ON     
PS1       ON       ON       ON     
PS2       ON       ON       ON     
PS3       ON       ON       ON     

------------------------------------------------------------------------------
Power Supplies:
------------------------------------------------------------------------------
Supply  Status          Underspeed  Overtemp  Overvolt  Undervolt  Overcurrent
------------------------------------------------------------------------------
PS0     FAILED          OFF         OFF       OFF       OFF        OFF
PS1     FAILED          OFF         OFF       OFF       OFF        OFF
PS2     FAILED          OFF         OFF       OFF       OFF        OFF
PS3     FAILED          OFF         OFF       OFF       OFF        OFF


Current sensor information cannot be displayed when System power is off.
sc> showlogs

Log entries since SEP 20 08:50:59
----------------------------------
SEP 20 08:50:59 : 00060003: "SC System booted."
SEP 20 08:50:59 : 00060000: "SC Login: User admin Logged on."
SEP 20 08:53:35 : 00060001: "SC Login Failure for user admin."
SEP 20 08:57:37 : 00060000: "SC Login: User admin Logged on."
SEP 20 09:13:17 : 00060000: "SC Login: User admin Logged on."
SEP 20 09:13:30 : 00040001: "SC Request to Power On Host."
SEP 20 09:13:35 : 00040066: "PSU @ PS0 has FAILED."
SEP 20 09:13:35 : 00040066: "PSU @ PS1 has FAILED."
SEP 20 09:13:35 : 00040066: "PSU @ PS2 has FAILED."
SEP 20 09:13:35 : 00040066: "PSU @ PS3 has FAILED."
sc> poweroff
Host system power is already off

论坛徽章:
0
发表于 2010-09-20 17:31 |显示全部楼层
4个电源在报错

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
发表于 2010-09-20 17:35 |显示全部楼层
真牛,一次坏4个电源。。。。。

论坛徽章:
0
发表于 2010-09-20 17:46 |显示全部楼层
电源应该没有坏,怀疑电源分配板的问题。电源灯显示正常

论坛徽章:
1
19周年集字徽章-19
日期:2020-01-08 15:08:20
发表于 2010-09-20 19:23 |显示全部楼层
一次性坏4个电源的可能性比较低,如果是的话有可能的话那应该外部供电原因。

我觉得应该是电源背板有问题了。

论坛徽章:
0
发表于 2010-09-20 22:57 |显示全部楼层
嗯 背板,可以先排除下看看

论坛徽章:
0
发表于 2010-09-21 13:23 |显示全部楼层
宝贝们全是经验判断背板,有没有理论的?电源背板很不好拆!

另外,下面做的动作:
sc> poweron
sc>
SC Alert: PSU @ PS0 has FAILED.

SC Alert: PSU @ PS1 has FAILED.

SC Alert: PSU @ PS2 has FAILED.

SC Alert: PSU @ PS3 has FAILED.

sc>


电源是假加电,电源是启动了,电源上的等也正常亮了.从sc命令看出是假加电!请看:

sc> poweroff
Host system power is already off

难道是sc出了什么问题吗?

论坛徽章:
0
发表于 2010-09-21 17:21 |显示全部楼层
宝贝们全是经验判断背板,有没有理论的?电源背板很不好拆!

另外,下面做的动作:
sc> poweron
sc>
...
rmb 发表于 2010-09-21 13:23



    你太可爱了 呵呵

论坛徽章:
0
发表于 2010-09-25 08:27 |显示全部楼层
最后更换主版,正常!

BTW:现在的主版电源供电方很有意思;是由两根很宽很厚的金属条(红色和蓝色)作为导电体。那位说说其优势? 呵呵,开始以为是固定电源分配板的架子呢!

论坛徽章:
0
发表于 2010-09-25 08:28 |显示全部楼层
感谢诸位大侠关照!
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP