- 论坛徽章:
- 0
|
本帖最后由 exright 于 2010-10-09 11:21 编辑
[ssffzz1] 兄批评的对,都是在IT艰难打拼的,应互相支持,别”工“人相轻!
最终结果还是如[ssffzz1] 说的,换了个新版本,就好了,在这里把过程贴下:
一、交换机升级前
1、显示版本- <5328>dis version
- Huawei Versatile Routing Platform Software
- VRP (R) Software, Version 5.30 (S5300 V100R002C02B181SPC001)
- Copyright (C) 2007-2008 Huawei Technologies Co., Ltd.
复制代码 2、显示NTP状态- <5328>dis ntp-service status
- clock status: synchronized
- clock stratum: 3
- reference clock ID: x.x.x.x
- nominal frequency: 100.0000 Hz
- actual frequency: 100.0000 Hz
- clock precision: 2^17
- clock offset: -28800074.5447 ms
- root delay: 110.41 ms
- root dispersion: 47.48 ms
- peer dispersion: 19.64 ms
- reference time: 18:38:05.740 UTC Oct 8 2010(D059E38D.BDA61E0C)
复制代码 3、显示时区- <5328>dis clock
- 2010-10-08 18:38:57
- Friday
- Time Zone : GMT+8 minus 08:00:00
复制代码 二、交换机更新版本
1、从交换机登录FTP服务器- <5328>ftp x.x.x.x
- Trying x.x.x.x ...
- Press CTRL+K to abort
- Connected to x.x.x.x.
- 220- Ftp Site Powerd by BigFoolCat Ftp Server 1.0 (meishu1981@gmail.com)
- 220- Welcome to my ftp server
- 220
- User(x.x.x.x:(none)):ftp
- 331 User name okay, need password.
- Password:
- 230-
- 230- Ftp server have run for 0h-1m-56s
- 230 ftp logged in.
复制代码 2、下载新版交换机软件- [ftp]get S5300EI-V100R002C02SPC100.cc
- 200 PORT Command successful.
- 150 Opening BINARY mode data connection for S5300EI-V100R002C02SPC100.cc(7458012 bytes)
- 226 Transfer complete.
- FTP: 7458012 byte(s) received in 150.890 second(s) 49.42Kbyte(s)/sec.
复制代码 3、配置交换机下次启动时加载的软件- <5328>startup system-sof s5300ei-v100r002c02spc100.cc
- Warning: Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y
- BOOTROM begin to be upgraded ! please wait for a moment...
- Info: BOOTROM UPGRADE OK
- The new version is 009. Please restart to validate the upgrade.
- Succeeded in setting the software for booting system.
复制代码 3、重新启动交换机size=3]三、更新后
1、显示NTP状态- <5328>dis ntp-service status
- clock status: synchronized
- clock stratum: 3
- reference clock ID: x.x.x.x
- nominal frequency: 100.0000 Hz
- actual frequency: 100.0000 Hz
- clock precision: 2^17
- clock offset: 0.0000 ms
- root delay: 0.00 ms
- root dispersion: 0.00 ms
- peer dispersion: 0.00 ms
- reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
复制代码 但是reference time明显不对。
2、显示时区- <5328>dis clock
- 2010-10-08 18:42:05
- Friday
- Time Zone : GMT+8 add 08:00:00
复制代码 没想到这里已自动从minus改成add了。
3、显示版本- <5328>dis version
- Huawei Versatile Routing Platform Software
- VRP (R) Software, Version 5.30 (S5300 V100R002C02SPC100)
- Copyright (C) 2007-2008 Huawei Technologies Co., Ltd.
- Quidway S5328C-EI uptime is 0 day, 0 hour, 3 minutes
复制代码 4、重新配置时区后- <5328>clock timezone GMT+8 add 8
- 2010-10-08 18:44:30
- Friday
- Time Zone : GMT+8 add 08:00:00
- <5328>dis ntp-service status
- clock status: synchronized
- clock stratum: 3
- reference clock ID: x.x.x.x
- nominal frequency: 100.0000 Hz
- actual frequency: 100.0000 Hz
- clock precision: 2^17
- clock offset: 2.4612 ms
- root delay: 109.40 ms
- root dispersion: 2.46 ms
- peer dispersion: 18.46 ms
- reference time: 10:44:06.329 UTC Oct 8 2010(D0597476.545A1CAC)
复制代码 这样reference time 才正确。
5、修改时区验证一下- <5328>undo clock timezone
- <5328>clock timezone GMT-8 minus 8
- <5328>dis clock
- 2010-10-08 19:11:58
- Friday
- Time Zone : GMT-8 minus 08:00:00
复制代码 |
|