- 论坛徽章:
- 0
|
v440加电后报错，感觉像是硬盘背板有问题？请大侠看下，谢谢！
Subtest unit-rdy-test
ERROR: LSI1030: timeout waiting for interrupt status.
ERROR: LSI1030 MPT Firmware, receive-message: issue-port-enable failed.
ERROR: LSI1030: timeout waiting for interrupt status.
ERROR: LSI1030 MPT Firmware, receive-message: issue-port-enable failed.
ERROR : 1030 scsi open failed.
DEVICE : /pci@1f,700000/scsi@2,1
SUBTEST : selftest:unit-rdy-test
MACHINE : Sun Fire V440
SERIAL# : 61655259
DATE : 11/01/2010 07:07:43 GMT
CONTR0LS: diag-level=max test-args=subtests,verbose
Error: /pci@1f,700000/scsi@2,1 selftest failed, return code = 1
Testing /pci@1f,700000/scsi@2
Subtest vendor-id-test
Subtest device-id-test
Subtest status-reg-test
Subtest class-reg-test
Subtest message-addr-test
Subtest mem0-test
Subtest nvram-test
Subtest reset-chip-test
Subtest unit-rdy-test
ERROR: LSI1030: timeout waiting for interrupt status.
ERROR: LSI1030 MPT Firmware, receive-message: issue-port-enable failed.
ERROR: LSI1030: timeout waiting for interrupt status.
ERROR: LSI1030 MPT Firmware, receive-message: issue-port-enable failed.
ERROR : 1030 scsi open failed.
DEVICE : /pci@1f,700000/scsi@2
SUBTEST : selftest:unit-rdy-test
MACHINE : Sun Fire V440
SERIAL# : 61655259
DATE : 11/01/2010 07:13:03 GMT
CONTR0LS: diag-level=max test-args=subtests,verbose
Error: /pci@1f,700000/scsi@2 selftest failed, return code = 1
System is operating in Service Mode.
ERROR: OpenBoot Diagnostics failed.
ERROR: OpenBoot Diagnostics failed
WARNING: Device /pci@1f,700000/scsi@2,1 already marked with 'status' == fail
WARNING: Device /pci@1f,700000/scsi@2 already marked with 'status' == fail
SC Alert: /pci@1f,700000/scsi@2,1 fail
SC Alert: /pci@1f,700000/scsi@2 fail
{3} ok
{3} ok printenv
Variable Name Value Default Value
test-args
diag-passes 1 1
local-mac-address? false false
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device screen screen
input-device keyboard keyboard
auto-boot-on-error? true true
error-reset-recovery sync sync
load-base 16384 16384
auto-boot? false true
boot-command boot boot
diag-file
diag-device net net
boot-file
boot-device vx-bootdisk01 vx-mirrdis ... disk net
use-nvramrc? true false
nvramrc ." ChassisSerialNumber 0 ...
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity normal normal
diag-trigger error-reset power-on-res ... error-reset power-on-res ...
service-mode? false false
diag-script normal normal
diag-level min max
diag-switch? false false
{3} ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@1f,700000/scsi@2,1
/pci@1f,700000/scsi@2
ERROR: LSI1030: timeout waiting for interrupt status.
ERROR: LSI1030 MPT Firmware, receive-message: issue-port-enable failed.
SC Alert: DISK @ HDD2 has been removed.
Target 0
Unit 0 Disk FUJITSU MAW3073NCSUN72G 1703 143374738 Blocks, 70007 MB
Target 1
Unit 0 Disk SEAGATE ST373207LSUN72G 0354 143374738 Blocks, 70007 MB
/pci@1d,700000/SUNW,qlc@1
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down
/pci@1c,600000/SUNW,qlc@1
Fibre Channel link not ready - Loss of Sync
Fibre Channel link down
{3} ok devalias
net /pci@1c,600000/network@2
net1 /pci@1f,700000/network@1
net0 /pci@1c,600000/network@2
cdrom /pci@1e,600000/ide@d/cdrom@0,0:f
ide /pci@1e,600000/ide@d
disk3 /pci@1f,700000/scsi@2/disk@3,0
disk2 /pci@1f,700000/scsi@2/disk@2,0
disk1 /pci@1f,700000/scsi@2/disk@1,0
disk0 /pci@1f,700000/scsi@2/disk@0,0
disk /pci@1f,700000/scsi@2/disk@0,0
scsi /pci@1f,700000/scsi@2
i2c /pci@1e,600000/isa@7/i2c@0,320
sc-control /pci@1e,600000/isa@7/rmc-comm@0,3e8
ttyb /pci@1e,600000/isa@7/serial@0,2e8
ttya /pci@1e,600000/isa@7/serial@0,3f8
pci1f /pci@1f,700000
pci1e /pci@1e,600000
pci1d /pci@1d,700000
pci1c /pci@1c,600000
isa /pci@1e,600000/isa@7
name aliases
{3} ok boot启动后会报
System is operating in Service Mode.
ERROR: OpenBoot Diagnostics failed
WARNING: Device /pci@1f,700000/scsi@2,1 being marked with 'status' == fail
WARNING: Device /pci@1f,700000/scsi@2 being marked with 'status' == fail
SC Alert: /pci@1f,700000/scsi@2,1 fail
SC Alert: /pci@1f,700000/scsi@2 fail |
|
免费注册
发表于 2010-11-01 17:38
