NT5220更换主板

大海aust

各位大哥，回复积极一点吧，这个事还得处理吧！

东方蜘蛛

先搞清楚有没有做硬raid！难道用户也不知道？

东方蜘蛛

{0} ok setenv fcode-debug? true
  {0} ok setenv auto-boot? false  
  {0} ok reset-all
  Path select instructions for T1000/Erie (dual-disk configuration is required for RAID operations):  
  {0} ok select /pci@7c0/pci@0/pci@8/scsi@2
  Path select instructions for T2000/Ontario (pn 501-6843):  
  {0} ok select /pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2
  Path select instructions for T2000+/Ontario+ (pn 501-7501):  
  {0} ok select /pci@780/pci@0/pci@9/scsi@0
  Path select instructions for V215/V245/Seattle:  
  {0} ok select /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1
  Path select instructions for  T5120/T5220/Huron:  
  {0} ok select /pci@0/pci@0/pci@2/scsi@0
  Path select instructions for  T5140/T5240/Maramba:  
  {0} ok select /pci@400/pci@0/pci@8/scsi@0/  
  Path select instructions for  T5440/Batoka:  
  {0} ok select /pci@400/pci@0/pci@1/scsi@0/
  Generic instructions for T1000, T2000, V215, V245, T5x20, T5x40:  
  {0} ok show-volumes ( Look for the inactive volume)  
  {0} ok X activate-volume (X is the volume number)  
  {0} ok unselect-dev  
  {0} ok probe-scsi-all (to check for disks)
  When dealing with multiple volumes make sure they are activated in descending order:
  Generic instructions for T1000, T2000, V215, V245, T5x20, T5x40:  
  {0} ok show-volumes  
  {0} ok 1 activate-volume  
  {0} ok 0 activate-volume  
  {0} ok unselect-dev  
  {0} ok probe-scsi-all (to check for disks)
  Failure to do so will result in the following error and will require a reset-all prior to activating the second volume:  
  {0} ok 0 activate-volume  Volume 0 is now activated  
  {0} ok 1 activate-volume  
  RAID volume request failed, ioc-status = 0007  
  Volume 1 could not be activated
  Following activation the first volume will remain 'Degraded' until both volumes have completed syncing.

大海aust

me,too!

东方蜘蛛

............

zhmzhouming

谢谢蜘蛛，收藏了。

东方蜘蛛

外行看热闹内行看门道，懂的人看了就知道怎么搞了

大海aust

貌似我也看懂了一点点

东方蜘蛛