NBU 备份oracle报错

yoyosys

channel ch01: starting piece 1 at 2010-12-07 17:31:28
RMAN-03009: failure of backup command on ch00 channel at 12/07/2010 17:32:53
ORA-19506: failed to create sequential file, name="bk_166_1_737141488", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
   VxBSACreateObject: Failed with error:
   Server Status:  termination requested by administrator
channel ch00 disabled, job failed on it will be run on another channel
released channel: ch00
released channel: ch01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ch01 channel at 12/07/2010 17:32:53
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
   Failed to process backup file <bk_167_1_737141488>
ORA-19502: write error on file "bk_167_1_737141488", blockno 3296769 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: Error received from media manager layer, error text:
   VxBSASendData: Failed with error:


有哪位兄弟碰到过这方面的问题，可以确认底层带库没问题

xzc999

lib库有问题！
你没做链接？

yoyosys

链接做过，这个备份任务，是分配了两个通道，有一个通道能正常进行备份，另一个就报错，最后备份是不成功的

lrwxrwxrwx   1 oracle   oinstall      36 Dec  7 14:41 libobk.so -> /usr/openv/netbackup/bin/libobk.so.1

yoyosys

问题解决了，原来是服务器多网卡的问题，在bp.conf文件中定义一下就好了，如下：
REQUIRED_INTERFACE = IP_address

xzc999

asmboy001

问题解决了，原来是服务器多网卡的问题，在bp.conf文件中定义一下就好了，如下：
REQUIRED_INTERFACE = IP ...
yoyosys 发表于 2010-12-08 13:49

    REQUIRED_INTERFACE = hostname

yoyosys

REQUIRED_INTERFACE = hostname
asmboy001 发表于 2010-12-08 19:17

两者一样的

johnson2002

回复 4# yoyosys

    什么样的算多网卡？ 心跳网卡算不算？还是必须up起来并配有Ip的？还是必须同一网段的？
我的环境： nbu cluster（通过配SFHA实现), 心跳网卡bge1 .bge2,公有网卡bge3.

root@hosta/usr/openv/netbackup#dladm show-dev
bge0            link: unknown   speed: 0     Mbps       duplex: unknown
bge1            link: up        speed: 100   Mbps       duplex: full
bge2            link: up        speed: 100   Mbps       duplex: full
bge3            link: up        speed: 100   Mbps       duplex: full
root@hosta/usr/openv/netbackup#ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
bge3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 203.78.6.201 netmask ffffff00 broadcast 203.78.6.255
        ether 0:14:4f:ac:a0:33
bge3:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 203.78.6.34 netmask ffffff00 broadcast 203.78.6.255

root@hosta/usr/openv/netbackup#more bp.conf
SERVER = hostvip
CLIENT_NAME = hosta
EMMSERVER = hostvip
SERVER = hosta
SERVER = hostb
CLUSTER_NAME = hostvip
VXDBMS_NB_DATA = /opt/VRTSnbu/db/data
VERBOSE = 5
ENABLE_ROBUST_LOGGING = YES
KMS_DIR = /opt/VRTSnbu/kms

无此参数，backup oracle rac client完全成功。
SERVER = sun215vip
CLIENT_NAME = sun215a
EMMSERVER = sun215vip
SERVER = sun215a
SERVER = sun215b
CLUSTER_NAME = sun215vip
VXDBMS_NB_DATA = /opt/VRTSnbu/db/data
VERBOSE = 5
ENABLE_ROBUST_LOGGING = YES
KMS_DIR = /opt/VRTSnbu/kms