博科光纤交换机如何更改domain id ？

milujite

1. switch:admin> switchdisable
   
2. switch:admin> configure
   
3. Configure...
   
4.   Fabric parameters (yes, y, no, n): [no] y
   
5.     Domain: (1..239) [1]
   
6.     Enable a 256 Area Limit
   
7.       (0 = No,
   
8.        1 = Zero Based Area Assignment,
   
9.        2 = Port Based Area Assignment): (0..2) [0]  1
   
10.     WWN Based persistent PID (yes, y, no, n): [no]
    
11. Allow XISL Use (yes, y, no, n): [yes] yes
    
12. R_A_TOV: (4000..120000) [10000]
    
13. E_D_TOV: (1000.. 5000) [2000]
    
14. WAN_TOV: (0..30000) [0]
    
15. MAX_HOPS: (7..19) [7]
    
16. Data field size: (256..2112) [2112]
    
17. Sequence Level Switching: (0..1) [0]
    
18. Disable Device Probing: (0..1) [0]
    
19. Suppress Class F Traffic: (0..1) [0]
    
20. Per-frame Route Priority: (0..1) [0]
    
21. Long Distance Fabric: (0..1) [0]
    
22. BB credit: (1..27) [16]
    
23. Disable FID Check (yes, y, no, n): [no]
    
24.    Insistent Domain ID Mode (yes, y, no, n): [no]
    
25. Virtual Channel parameters (yes, y, no, n): [no]
    
26. F-Port login parameters (yes, y, no, n): [no]
    
27. Zoning Operation parameters (yes, y, no, n): [no]
    
28. RSCN Transmission Mode (yes, y, no, n): [no]
    
29. Arbitrated Loop parameters (yes, y, no, n): [no]
    
30. System services (yes, y, no, n): [no]
    
31. Portlog events enable (yes, y, no, n): [no]  
    
32. ssl attributes (yes, y, no, n): [no]
    
33. rpcd attributes (yes, y, no, n): [no]
    
34. webtools attributes (yes, y, no, n): [no]
    
35. switch:admin>  switchenable

复制代码

Domain: (1..239) [1]
FABRIC OS的command reference里有啊，