- 论坛徽章:
- 0
|
直接上输出信息
SkyEye 1.3.2
SkyEye is an Open Source project under GPL. All rights of different parts or
modules are reserved by their author. Any modification or redistributions of
SkyEye should not remove or modify the annoucement of SkyEye copyright.
Get more information about it, please visit the homepage http://www.skyeye.org.
Type "help" to get command list.
(skyeye)start
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
In do_mach_option, mach info: name s3c4510b, mach_init addr 0x7f0d38092d70
ethmod num=1, mac addr=0:0:0:0:0:0, hostip=10.0.0.2
failed to setup_module (name:net, type:s3c4510b)
tapif_init: icotl TUNSETIFF erroruart_mod:0, desc_in:, desc_out:, converter:
Loaded ROM images/romfs.img
SKYEYE: use arm7100 mmu ops
exec file "linux-2.4.x/linux"'s format is elf64-x86-64.
load section .init: addr = 0x00008000 size = 0x0000a000.
load section .text: addr = 0x00012000 size = 0x000d1631.
load section .data: addr = 0x000e4000 size = 0x00007bdc.
not load section .bss: addr = 0x000ebbe0 size = 0x0001f340 .
not load section .debug_abbrev: addr = 0x00000000 size = 0x00031f67 .
not load section .debug_info: addr = 0x00000000 size = 0x013f3fe4 .
not load section .debug_line: addr = 0x00000000 size = 0x0029965e .
not load section .debug_pubnames: addr = 0x00000000 size = 0x0000a390 .
not load section .debug_aranges: addr = 0x00000000 size = 0x00001e60 .
In SIM_start, Set PC to the address 0x8020
(skyeye)(running)Linux version 2.4.24-uc0 (root@kevin-machine) (gcc version
2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux
XIP and shared lib patches from http://www.snapgear.com/)) #9 Fri Dec 10 16:
45:54 CST 2010
Processor: Samsung S3C4510B revision 6
Architecture: SNDS100
On node 0 totalpages: 2048
zone(0): 0 pages.
zone(1): 2048 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/r0m0
Calibrating delay loop... 20.78 BogoMIPS
Memory: 8MB = 8MB total
Memory: 7024KB available (837K code, 158K data, 40K init)
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Samsung S3C4510 Serial driver version 0.9 (2001-12-27) with no serial
options enabled
ttyS00 at 0x3ffd000 (irq = 5) is a S3C4510B
ttyS01 at 0x3ffe000 (irq = 7) is a S3C4510B
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: C6E08-C6E07 [VIRTUAL C6E08-C6E07] (RO)
RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
Blkmem: bad access: block=0, count=2 (pos=400, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 0
romfs: unable to read superblock
Blkmem: bad access: block=2, count=2 (pos=800, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 2
EXT2-fs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 1f:00
那位大虾遇见并解决了,指教下~ |
|