求助 我的vsftpd哪里错啦？？在线等

bljinyi

/etc/pam.d/vsftp
文件如下：
#%PAM-1.0
session    optional     pam_keyinit.so    force revoke
auth required /lib64/security/pam_mysql.so user=vsftpd passwd=vsftpd  host=127.0.0.1 db=vsftpd table=accounts usercolumn=username   passwdcolumn=pass crypt=0
account required /lib64/security/pam_mysql.so user=vsftpd passwd=vsftpd  host=127.0.0.1 db=vsftpd table=accounts usercolumn=username  passwdcolumn=pass crypt=0
etc/vsftpd/vsftp.conf
文件如下：
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=vsftpd
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
nopriv_user=vsftpd
chroot_local_user=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
# 在这里 vsftpd 会允许 vsftpd 这个用户等入 /home/vsftpd/$USER 这个目录
guest_enable=YES
guest_username=vsftpd
#local_root=/home/vsftpd/$USER
#user_sub_token=$USER
virtual_use_local_privs=YES
user_config_dir=/etc/vsftpd/vsftpd_user_conf

在/etc/vsftpd/下创建了vsftpd_user_conf文件 并在mysql数据库里添加了test用户 在vsftpd_user_conf文件夹创建了test文件内容如下：

dirlist_enable=YES

download_enable=YES
dirlist_enable=YES

download_enable=YES
local_root=/home/users/test
write_enable=YES

连接ftp提示：530 Login incorrect.
系统CentOS release 5.4 (Final)
哪位大哥帮帮小弟

linpeng6139

能启动吗?

blueswxs

帖一下这个日志，/var/log/secure，验证的东西都在这里。

bljinyi

能启动的

bljinyi

bljinyi

把vsftpd用户加入root组后

bljinyi

关了selinux就可以使用 如果要开启selinux的话要怎么设置能

w80286

将FTP添加进selinux规则中：运行setup，选择firewal configuration，进入custiomize子项，将allow  incomming 项中FTP选中，怎么保存设置我不知道!