ubuntu 8.04 上 octave 3.2.0 安装

ToDDY

1.下载 octave 3.2.0
wget  ftp://ftp.octave.org/pub/octave/octave-3.2.2.tar.bz2     
2.解压并进入解压后的文件夹
$ tar jxvf oct*.tar.bz2
$ cd octa*
3.to install many things:
主要是装gfortran, 并
$ configure f77=gfortran
装有包有如下的，装不上的不管，好像没啥影响
==========================================
sudo apt-get build-dep octave
sudo apt-get install g77
sudo apt-get install f2c
sudo apt-get install fort77
sudo apt-get install gfortran
sudo apt-get install xlibs-dev
sudo apt-get install libx11-dev
sudo apt-get install x11-dev
sudo apt-get install build-essential
sudo apt-get install checkinstall
sudo apt-get install cvs git-core mercurial
sudo apt-get install flex
sudo apt-get install bison
sudo apt-get install libumfpack
sudo apt-get install libumfpack4-dev
sudo apt-get install bootparamd
sudo apt-get install enamdict
sudo apt-get install libarpack2
sudo apt-get install libarpack2-dev
sudo apt-get install libarpack++2c2a
sudo apt-get install libarpack++2-dev
sudo apt-get install glpk
sudo apt-get install libglpk0
sudo apt-get install libncurses5-dev
sudo apt-get install libreadline5-dev
sudo apt-get install libsuitesparse-dev
sudo apt-get install fftw3-dev
sudo apt-get install libglpk-dev
sudo apt-get install libhdf5-serial-dev
sudo apt-get install libpcre3-dev
sudo apt-get install libqhull-dev
sudo apt-get install gperf
sudo apt-get install gnuplot
==========================================
4. make & make install
5. 装 communication 包
一些包可在 http://octave.sourceforge.net/packages.html 下载到；
communications 包依赖于 signal,optim,specfun,miscellaneous 四个包，所以下载这5个包
http://nchc.dl.sourceforge.net/project/octave/Octave%20Forge%20Packages/R2009-06-07/optim-1.0.6.tar.gz
http://nchc.dl.sourceforge.net/project/octave/Octave%20Forge%20Packages/R2009-06-07/signal-1.0.10.tar.gz
http://nchc.dl.sourceforge.net/project/octave/Octave%20Forge%20Packages/R2009-05-08/specfun-1.0.8.tar.gz
http://nchc.dl.sourceforge.net/project/octave/Octave%20Forge%20Packages/R2009-06-07/miscellaneous-1.0.9.tar.gz
http://nchc.dl.sourceforge.net/project/octave/Octave%20Forge%20Packages/R2009-06-07/communications-1.0.10.tar.gz
另一个下载地址：
http://freebsd.ntu.edu.tw/FreeBSD/distfiles/octave-forge/
上述各包的依赖关系：
http://octave.sourceforge.net/packages.html

下载完以后， $  echo "pkg install name*.tar.gz" | octave -q 依次装上各 tar.gz 包
参考文章：
[1]
Build Octave-3.2.0 from source? - make error!! - DapperDrake
[2]  
F77 vs gfotran
[3]  
quick recipe for installing latest Octave-forge for Debian users
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u2/69737/showart_2155230.html