免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
1234下一页
最近访问板块 发新帖
查看: 123364 | 回复: 36

[FastDFS] FastDFS 配置文件详解(修订版1) [复制链接]

论坛徽章:
0
发表于 2010-01-07 09:52 |显示全部楼层
本帖最后由 happy_fish100 于 2012-11-04 20:26 编辑

昨天开始对学习FastDFS, 通过和版主的聊天 对它进行了些了解,坚持交流进步的目的,现在对配置文件进行中文理解性的转译,小弟不才,错误的地方希望版主和各为达人指出,提出的问题望各位解答(贴子是在晚上吃饭前赶出来的,写的很粗槽,以后可以帮大家整理,写成标准的说明什么的

首先是 tracker.conf

# is this config file disabled
# false for enabled
# true for disabled
disabled=false
# 这个配置文件是否不生效,呵呵(改成是否生效是不是会让人感觉好点呢?) false 为生效(否则不生效) true反之

# bind an address of this host
# empty for bind all addresses of this host
bind_addr=
# 是否绑定IP,
# bind_addr= 后面为绑定的IP地址 (常用于服务器有多个IP但只希望一个IP提供服务)。如果不填则表示所有的(一般不填就OK),相信较熟练的SA都常用到类似功能,很多系统和应用都有

# the tracker server port
port=22122
# 提供服务的端口,不作过多解释了

# connect timeout in seconds
# default value is 30s
connect_timeout=30
#连接超时时间,针对socket套接字函数connect

# network timeout in seconds
network_timeout=60
#  tracker server的网络超时,单位为秒。发送或接收数据时,如果在超时时间后还不能发送或接收数据,则本次网络通信失败。

# the base path to store data and log files
base_path=/home/yuqing/fastdfs
# base_path 目录地址(根目录必须存在,子目录会自动创建)
# 附目录说明:
  tracker server目录及文件结构:
  ${base_path}
    |__data
    |     |__storage_groups.dat:存储分组信息
    |     |__storage_servers.dat:存储服务器列表
    |__logs
          |__trackerd.log:tracker server日志文件

数据文件storage_groups.dat和storage_servers.dat中的记录之间以换行符(\n)分隔,字段之间以西文逗号(,)分隔。
storage_groups.dat中的字段依次为:
  1. group_name:组名
  2. storage_port:storage server端口号

storage_servers.dat中记录storage server相关信息,字段依次为:
  1. group_name:所属组名
  2. ip_addr:ip地址
  3. status:状态
  4. sync_src_ip_addr:向该storage server同步已有数据文件的源服务器
  5. sync_until_timestamp:同步已有数据文件的截至时间(UNIX时间戳)
  6. stat.total_upload_count:上传文件次数
  7. stat.success_upload_count:成功上传文件次数
  8. stat.total_set_meta_count:更改meta data次数
  9. stat.success_set_meta_count:成功更改meta data次数
  10. stat.total_delete_count:删除文件次数
  11. stat.success_delete_count:成功删除文件次数
  12. stat.total_download_count:下载文件次数
  13. stat.success_download_count:成功下载文件次数
  14. stat.total_get_meta_count:获取meta data次数
  15. stat.success_get_meta_count:成功获取meta data次数
  16. stat.last_source_update:最近一次源头更新时间(更新操作来自客户端)
  17. stat.last_sync_update:最近一次同步更新时间(更新操作来自其他storage server的同步)

# max concurrent connections this server supported
# max_connections worker threads start when this service startup
max_connections=256
# 系统提供服务时的最大连接数。对于V1.x,因一个连接由一个线程服务,也就是工作线程数。
# 对于V2.x,最大连接数和工作线程数没有任何关系

# work thread count, should <= max_connections
# default value is 4
# since V2.00
# V2.0引入的这个参数,工作线程数,通常设置为CPU数
work_threads=4

# the method of selecting group to upload files
# 0: round robin
# 1: specify group
# 2: load balance, select the max free space group to upload file
store_lookup=2
# 上传组(卷) 的方式 0:轮询方式 1: 指定组 2: 平衡负载(选择最大剩余空间的组(卷)上传)
# 这里如果在应用层指定了上传到一个固定组,那么这个参数被绕过

# which group to upload file
# when store_lookup set to 1, must set store_group to the group name
store_group=group2
# 当上一个参数设定为1 时 (store_lookup=1,即指定组名时),必须设置本参数为系统中存在的一个组名。如果选择其他的上传方式,这个参数就没有效了。

# which storage server to upload file
# 0: round robin (default)
# 1: the first server order by ip address
# 2: the first server order by priority (the minimal)
store_server=0
# 选择哪个storage server 进行上传操作(一个文件被上传后,这个storage server就相当于这个文件的storage server源,会对同组的storage server推送这个文件达到同步效果)
# 0: 轮询方式 
# 1: 根据ip 地址进行排序选择第一个服务器(IP地址最小者)
# 2: 根据优先级进行排序(上传优先级由storage server来设置,参数名为upload_priority)

# which path(means disk or mount point) of the storage server to upload file
# 0: round robin
# 2: load balance, select the max free space path to upload file
store_path=0
# 选择storage server 中的哪个目录进行上传。storage server可以有多个存放文件的base path(可以理解为多个磁盘)。
# 0: 轮流方式,多个目录依次存放文件
# 2: 选择剩余空间最大的目录存放文件(注意:剩余磁盘空间是动态的,因此存储到的目录或磁盘可能也是变化的)

# which storage server to download file
# 0: round robin (default)
# 1: the source storage server which the current file uploaded to
download_server=0
# 选择哪个 storage server 作为下载服务器
# 0: 轮询方式,可以下载当前文件的任一storage server
# 1: 哪个为源storage server 就用哪一个 (前面说过了这个storage server源 是怎样产生的) 就是之前上传到哪个storage server服务器就是哪个了

# reserved storage space for system or other applications.
# if the free(available) space of any stoarge server in
# a group <= reserved_storage_space,
# no file can be uploaded to this group.
# bytes unit can be one of follows:
### G or g for gigabyte(GB)
### M or m for megabyte(MB)
### K or k for kilobyte(KB)
### no unit for byte(B)
### XX.XX% as ratio such as reserved_storage_space = 10%
reserved_storage_space = 10%
# storage server 上保留的空间,保证系统或其他应用需求空间。可以用绝对值或者百分比(V4开始支持百分比方式)。
#(指出 如果同组的服务器的硬盘大小一样,以最小的为准,也就是只要同组中有一台服务器达到这个标准了,这个标准就生效,原因就是因为他们进行备份)

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info
# 选择日志级别(日志写在哪?看前面的说明了,有目录介绍哦 呵呵)

#unix group name to run this program,
#not set (empty) means run by the group of current user
run_by_group=
# 操作系统运行FastDFS的用户组 (不填 就是当前用户组,哪个启动进程就是哪个)

#unix username to run this program,
#not set (empty) means run by current user
run_by_user=
# 操作系统运行FastDFS的用户 (不填 就是当前用户,哪个启动进程就是哪个)

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or
# host[01-08,20-25].domain.com, for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
allow_hosts=*
# 可以连接到此 tracker server 的ip范围(对所有类型的连接都有影响,包括客户端,storage server)

# sync log buff to disk every interval seconds
# default value is 10 seconds
sync_log_buff_interval = 10
# 同步或刷新日志信息到硬盘的时间间隔,单位为秒
# 注意:tracker server 的日志不是时时写硬盘的,而是先写内存。

# check storage server alive interval
check_active_interval = 120
# 检测 storage server 存活的时间隔,单位为秒。
# storage server定期向tracker server 发心跳,如果tracker server在一个check_active_interval内还没有收到storage server的一次心跳,那边将认为该storage server已经下线。所以本参数值必须大于storage server配置的心跳时间间隔。通常配置为storage server心跳时间间隔的2倍或3倍。

# thread stack size, should > 512KB
# default value is 1MB
thread_stack_size=1MB
# 线程栈的大小。FastDFS server端采用了线程方式。更正一下,tracker server线程栈不应小于64KB,不是512KB。
# 线程栈越大,一个线程占用的系统资源就越多。如果要启动更多的线程(V1.x对应的参数为max_connections,
V2.0为work_threads),可以适当降低本参数值。

# auto adjust when the ip address of the storage server changed
# default value is true
storage_ip_changed_auto_adjust=true
# 这个参数控制当storage server IP地址改变时,集群是否自动调整。注:只有在storage server进程重启时才完成自动调整。

# storage sync file max delay seconds
# default value is 86400 seconds (one day)
# since V2.00
storage_sync_file_max_delay = 86400
# V2.0引入的参数。存储服务器之间同步文件的最大延迟时间,缺省为1天。根据实际情况进行调整
# 注:本参数并不影响文件同步过程。本参数仅在下载文件时,判断文件是否已经被同步完成的一个阀值(经验值)

# the max time of storage sync a file
# default value is 300 seconds
# since V2.00
storage_sync_file_max_time = 300
# V2.0引入的参数。存储服务器同步一个文件需要消耗的最大时间,缺省为300s,即5分钟。
# 注:本参数并不影响文件同步过程。本参数仅在下载文件时,作为判断当前文件是否被同步完成的一个阀值(经验值)

# if use a trunk file to store several small files
# default value is false
# since V3.00
use_trunk_file = false
# V3.0引入的参数。是否使用小文件合并存储特性,缺省是关闭的。

# the min slot size, should <= 4KB
# default value is 256 bytes
# since V3.00
slot_min_size = 256
# V3.0引入的参数。
# trunk file分配的最小字节数。比如文件只有16个字节,系统也会分配slot_min_size个字节。

# the max slot size, should > slot_min_size
# store the upload file to trunk file when it's size <=  this value
# default value is 16MB
# since V3.00
slot_max_size = 16MB
# V3.0引入的参数。
# 只有文件大小<=这个参数值的文件,才会合并存储。如果一个文件的大小大于这个参数值,将直接保存到一个文件中(即不采用合并存储方式)。

# the trunk file size, should >= 4MB
# default value is 64MB
# since V3.00
trunk_file_size = 64MB
# V3.0引入的参数。
# 合并存储的trunk file大小,至少4MB,缺省值是64MB。不建议设置得过大。

# if create trunk file advancely
# default value is false
trunk_create_file_advance = false
# 是否提前创建trunk file。只有当这个参数为true,下面3个以trunk_create_file_打头的参数才有效。

# the time base to create trunk file
# the time format: HH:MM
# default value is 02:00
trunk_create_file_time_base = 02:00
# 提前创建trunk file的起始时间点(基准时间),02:00表示第一次创建的时间点是凌晨2点。

# the interval of create trunk file, unit: second
# default value is 38400 (one day)
trunk_create_file_interval = 86400
# 创建trunk file的时间间隔,单位为秒。如果每天只提前创建一次,则设置为86400

# the threshold to create trunk file
# when the free trunk file size less than the threshold, will create
# the trunk files
# default value is 0
trunk_create_file_space_threshold = 20G
# 提前创建trunk file时,需要达到的空闲trunk大小
# 比如本参数为20G,而当前空闲trunk为4GB,那么只需要创建16GB的trunk file即可。

# if check trunk space occupying when loading trunk free spaces
# the occupied spaces will be ignored
# default value is false
# since V3.09
# NOTICE: set this parameter to true will slow the loading of trunk spaces
# when startup. you should set this parameter to true when neccessary.
trunk_init_check_occupying = false
#trunk初始化时,是否检查可用空间是否被占用

# if ignore storage_trunk.dat, reload from trunk binlog
# default value is false
# since V3.10
# set to true once for version upgrade when your version less than V3.10
trunk_init_reload_from_binlog = false
# 是否无条件从trunk binlog中加载trunk可用空间信息
# FastDFS缺省是从快照文件storage_trunk.dat中加载trunk可用空间,
# 该文件的第一行记录的是trunk binlog的offset,然后从binlog的offset开始加载

# if use storage ID instead of IP address
# default value is false
# since V4.00
use_storage_id = false
# 是否使用server ID作为storage server标识

# specify storage ids filename, can use relative or absolute path
# since V4.00
storage_ids_filename = storage_ids.conf
# use_storage_id 设置为true,才需要设置本参数
# 在文件中设置组名、server ID和对应的IP地址,参见源码目录下的配置示例:conf/storage_ids.conf

# if store slave file use symbol link
# default value is false
# since V4.01
store_slave_file_use_link = false
# 存储从文件是否采用symbol link(符号链接)方式
# 如果设置为true,一个从文件将占用两个文件:原始文件及指向它的符号链接。

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false
# 是否定期轮转error log,目前仅支持一天轮转一次

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00
# error log定期轮转的时间点,只有当rotate_error_log设置为true时有效

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0
# error log按大小轮转
# 设置为0表示不按文件大小轮转,否则当error log达到该大小,就会轮转到新文件中

# 以下是关于http的设置了 默认编译是不生效的 要求更改 #WITH_HTTPD=1 将 注释#去掉 再编译
# 关于http的应用 说实话 不是很了解 没有见到 相关说明 ,望 版主可以完善一下 以下是字面解释了
#HTTP settings
http.disabled=false   # HTTP服务是否不生效
http.server_port=8080  # HTTP服务端口


#use "#include" directive to include http other settiongs
##include http.conf  # 如果加载http.conf的配置文件 去掉第一个#

哈哈 完成了一个 下面是 storage.conf


# is this config file disabled
# false for enabled
# true for disabled
disabled=false  
#同上文了 就不多说了

# the name of the group this storage server belongs to
group_name=group1
# 指定 此 storage server 所在 组(卷)

# bind an address of this host
# empty for bind all addresses of this host
bind_addr=
# 同上文

# if bind an address of this host when connect to other servers
# (this storage server as a client)
# true for binding the address configed by above parameter: "bind_addr"
# false for binding any address of this host
client_bind=true
# bind_addr通常是针对server的。当指定bind_addr时,本参数才有效。
# 本storage server作为client连接其他服务器(如tracker server、其他storage server),是否绑定bind_addr。

# the storage server port
port=23000
#  storage server服务端口

# connect timeout in seconds
# default value is 30s
connect_timeout=30
#连接超时时间,针对socket套接字函数connect

# network timeout in seconds
network_timeout=60
#  storage server 网络超时时间,单位为秒。发送或接收数据时,如果在超时时间后还不能发送或接收数据,则本次网络通信失败。

# heart beat interval in seconds
heart_beat_interval=30
# 心跳间隔时间,单位为秒 (这里是指主动向tracker server 发送心跳)

# disk usage report interval in seconds
stat_report_interval=60
# storage server向tracker server报告磁盘剩余空间的时间间隔,单位为秒。


# the base path to store data and log files
base_path=/home/yuqing/fastdfs
# base_path 目录地址,根目录必须存在  子目录会自动生成 (注 :这里不是上传的文件存放的地址,之前是的,在某个版本后更改了)
# 目录结构 因为 版主没有更新到 论谈上 这里就不发了 大家可以看一下置顶贴:

# max concurrent connections server supported
# max_connections worker threads start when this service startup
max_connections=256
# 同上文

# work thread count, should <= max_connections
# default value is 4
# since V2.00
# V2.0引入的这个参数,工作线程数,通常设置为CPU数
work_threads=4

# the buff size to recv / send data
# default value is 64KB
# since V2.00
buff_size = 256KB
# V2.0引入本参数。设置队列结点的buffer大小。工作队列消耗的内存大小 = buff_size * max_connections
# 设置得大一些,系统整体性能会有所提升。
# 消耗的内存请不要超过系统物理内存大小。另外,对于32位系统,请注意使用到的内存不要超过3GB

# if read / write file directly
# if set to true, open file will add the O_DIRECT flag to avoid file caching
# by the file system. be careful to set this parameter.
# default value is false
disk_rw_direct = false
# V2.09引入本参数。设置为true,表示不使用操作系统的文件内容缓冲特性。
# 如果文件数量很多,且访问很分散,可以考虑将本参数设置为true

# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true
# V2.0引入本参数。磁盘IO读写是否分离,缺省是分离的。

# disk reader thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1
# V2.0引入本参数。针对单个存储路径的读线程数,缺省值为1。
# 读写分离时,系统中的读线程数 = disk_reader_threads * store_path_count
# 读写混合时,系统中的读写线程数 = (disk_reader_threads + disk_writer_threads) * store_path_count

# disk writer thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1
# V2.0引入本参数。针对单个存储路径的写线程数,缺省值为1。
# 读写分离时,系统中的写线程数 = disk_writer_threads * store_path_count
# 读写混合时,系统中的读写线程数 = (disk_reader_threads + disk_writer_threads) * store_path_count

# when no entry to sync, try read binlog again after X milliseconds
# 0 for try again immediately (not need to wait)
sync_wait_msec=200
# 同步文件时,如果从binlog中没有读到要同步的文件,休眠N毫秒后重新读取。0表示不休眠,立即再次尝试读取。
# 出于CPU消耗考虑,不建议设置为0。如何希望同步尽可能快一些,可以将本参数设置得小一些,比如设置为10ms

# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0
# 同步上一个文件后,再同步下一个文件的时间间隔,单位为毫秒,0表示不休眠,直接同步下一个文件。

# sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00

# sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59
# 上面二个一起解释。允许系统同步的时间段 (默认是全天) 。一般用于避免高峰同步产生一些问题而设定,相信sa都会明白

# write to the mark file after sync N files
# default value is 500
write_mark_file_freq=500
# 同步完N个文件后,把storage的mark文件同步到磁盘
# 注:如果mark文件内容没有变化,则不会同步

# path(disk or mount point) count, default value is 1
store_path_count=1
# 存放文件时storage server支持多个路径(例如磁盘)。这里配置存放文件的基路径数目,通常只配一个目录。

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
store_path0=/home/yuqing/fastdfs
#store_path1=/home/yuqing/fastdfs2
# 逐一配置store_path个路径,索引号基于0。注意配置方法后面有0,1,2 ......,需要配置0到store_path - 1。
# 如果不配置base_path0,那边它就和base_path对应的路径一样。

# subdir_count  * subdir_count directories will be auto created under each
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256
# FastDFS存储文件时,采用了两级目录。这里配置存放文件的目录个数 (系统的存储机制,大家看看文件存储的目录就知道了)
# 如果本参数只为N(如:256),那么storage server在初次运行时,会自动创建 N * N 个存放文件的子目录。

# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=10.62.164.84:22122
tracker_server=10.62.245.170:22122
# tracker_server 的列表 要写端口的哦 (再次提醒是主动连接tracker_server )
# 有多个tracker server时,每个tracker server写一行

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info
# 日志级别不多说

#unix group name to run this program,
#not set (empty) means run by the group of current user
run_by_group=
# 同上文了

#unix username to run this program,
#not set (empty) means run by current user
run_by_user=
# 同上文了 (提醒注意权限 如果和 webserver不搭 可以会产生错误 哦)

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or
# host[01-08,20-25].domain.com, for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
allow_hosts=*
# 允许连接本storage server的IP地址列表 (不包括自带HTTP服务的所有连接)
# 可以配置多行,每行都会起作用

# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode=0
#  文件在data目录下分散存储策略。
# 0: 轮流存放,在一个目录下存储设置的文件数后(参数file_distribute_rotate_count中设置文件数),使用下一个目录进行存储。
# 1: 随机存储,根据文件名对应的hash code来分散存储。

# valid when file_distribute_to_path is set to 0 (round robin),
# when the written file count reaches this number, then rotate to next path
# default value is 100
file_distribute_rotate_count=100   
# 当上面的参数file_distribute_path_mode配置为0(轮流存放方式)时,本参数有效。
# 当一个目录下的文件存放的文件数达到本参数值时,后续上传的文件存储到下一个目录中。

# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes=0
# 当写入大文件时,每写入N个字节,调用一次系统函数fsync将内容强行同步到硬盘。0表示从不调用fsync  

# sync log buff to disk every interval seconds
# default value is 10 seconds
sync_log_buff_interval=10
# 同步或刷新日志信息到硬盘的时间间隔,单位为秒
# 注意:storage server 的日志信息不是时时写硬盘的,而是先写内存。

# sync binlog buff / cache to disk every interval seconds
# this parameter is valid when write_to_binlog set to 1
# default value is 60 seconds
sync_binlog_buff_interval=60
# 同步binglog(更新操作日志)到硬盘的时间间隔,单位为秒
# 本参数会影响新上传文件同步延迟时间

# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval=300
# 把storage的stat文件同步到磁盘的时间间隔,单位为秒。
# 注:如果stat文件内容没有变化,不会进行同步

# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size=512KB
# 线程栈的大小。FastDFS server端采用了线程方式。
# 对于V1.x,storage server线程栈不应小于512KB;对于V2.0,线程栈大于等于128KB即可。
# 线程栈越大,一个线程占用的系统资源就越多。
# 对于V1.x,如果要启动更多的线程(max_connections),可以适当降低本参数值。

# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority=10
#  本storage server作为源服务器,上传文件的优先级,可以为负数。值越小,优先级越高。这里就和 tracker.conf 中store_server= 2时的配置相对应了

# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate=0
# 是否检测上传文件已经存在。如果已经存在,则不存在文件内容,建立一个符号链接以节省磁盘空间。 
# 这个应用要配合FastDHT 使用,所以打开前要先安装FastDHT
# 1或yes 是检测,0或no 是不检测

# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method=hash
# 文件去重时,文件内容的签名方式:
## hash: 4个hash code
## md5:MD5

# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS
# 当上个参数设定为1 或 yes时 (true/on也是可以的) , 在FastDHT中的命名空间。

# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive=0
# 与FastDHT servers 的连接方式 (是否为持久连接) ,默认是0(短连接方式)。可以考虑使用长连接,这要看FastDHT server的连接数是否够用。

# 下面是关于FastDHT servers 的设定 需要对FastDHT servers 有所了解,这里只说字面意思了
# you can use "#include filename" (not include double quotes) directive to
# load FastDHT server list, when the filename is a relative path such as
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf
# 可以通过 #include filename 方式来加载 FastDHT servers  的配置,装上FastDHT就知道该如何配置啦。
# 同样要求 check_file_duplicate=1 时才有用,不然系统会忽略
# fdht_servers.conf 记载的是 FastDHT servers 列表

# if log to access log
# default value is false
# since V4.00
use_access_log = false
# 是否将文件操作记录到access log

# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false
# 是否定期轮转access log,目前仅支持一天轮转一次

# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time=00:00
# access log定期轮转的时间点,只有当rotate_access_log设置为true时有效

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false
# 是否定期轮转error log,目前仅支持一天轮转一次

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00
# error log定期轮转的时间点,只有当rotate_error_log设置为true时有效

# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0
# access log按文件大小轮转
# 设置为0表示不按文件大小轮转,否则当access log达到该大小,就会轮转到新文件中

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0
# error log按文件大小轮转
# 设置为0表示不按文件大小轮转,否则当error log达到该大小,就会轮转到新文件中

# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record=false
# 文件同步的时候,是否忽略无效的binlog记录

下面是http的配置了。如果系统较大,这个服务有可能支持不了,可以自行换一个webserver,我喜欢lighttpd,当然ng也很好了。具体不说明了。相应这一块的说明大家都懂,不明白见上文。
#HTTP settings
http.disabled=false

# the port of the web server on this storage server
http.server_port=8888

http.trunk_size=256KB
# http.trunk_size表示读取文件内容的buffer大小(一次读取的文件内容大小),也就是回复给HTTP client的块大小。


# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=
# storage server上web server域名,通常仅针对单独部署的web server。这样URL中就可以通过域名方式来访问storage server上的文件了,
# 这个参数为空就是IP地址的方式。

#use "#include" directive to include HTTP other settiongs
##include http.conf

论坛徽章:
4
2015年辞旧岁徽章
日期:2015-03-03 16:54:152015年迎新春徽章
日期:2015-03-04 09:56:11IT运维版块每日发帖之星
日期:2016-08-11 06:20:00IT运维版块每日发帖之星
日期:2016-08-15 06:20:00
发表于 2010-01-10 20:27 |显示全部楼层

回复 #1 safeng 的帖子

感谢safeng的整理。我编辑了一下。
大家有不清楚的地方,欢迎随时反馈!

论坛徽章:
0
发表于 2010-01-28 17:07 |显示全部楼层
副本设置呢?

论坛徽章:
0
发表于 2010-05-11 22:27 |显示全部楼层
这个太好了,谢谢斑竹

论坛徽章:
0
发表于 2010-07-30 20:53 |显示全部楼层
有了这个,好理解多了

论坛徽章:
0
发表于 2010-08-09 22:41 |显示全部楼层
找的就是这个

论坛徽章:
0
发表于 2010-08-24 11:10 |显示全部楼层
哈哈,不得不对渔夫的精神表示钦佩~~~

论坛徽章:
4
2015年辞旧岁徽章
日期:2015-03-03 16:54:152015年迎新春徽章
日期:2015-03-04 09:56:11IT运维版块每日发帖之星
日期:2016-08-11 06:20:00IT运维版块每日发帖之星
日期:2016-08-15 06:20:00
发表于 2011-08-14 16:14 |显示全部楼层
本帖最后由 happy_fish100 于 2011-08-14 16:20 编辑

回复 1# safeng

storage.conf中影响storage server同步速度的参数有如下几个:
# when no entry to sync, try read binlog again after X milliseconds
# 0 for try again immediately (not need to wait)
sync_wait_msec=200
# 同步文件时,如果从binlog中没有读到要同步的文件,休眠N毫秒后重新读取。0表示不休眠,立即再次尝试读取。
# 不建议设置为0,如何希望同步尽可能快一些,可以将本参数设置得小一些,比如设置为10ms

# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0
# 同步上一个文件后,再同步下一个文件的时间间隔,单位为毫秒,0表示不休眠,直接同步下一个文件。

# sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00

# sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59
# 上面二个一起解释。允许系统同步的时间段 (默认是全天) 。一般用于避免高峰同步产生一些问题而设定,相信sa都会明白

# sync binlog buff / cache to disk every interval seconds
# this parameter is valid when write_to_binlog set to 1
# default value is 60 seconds
sync_binlog_buff_interval=60
# 同步binglog(更新操作日志)到硬盘的时间间隔,单位为秒
# 本参数会影响新上传文件同步延迟时间

论坛徽章:
1
2015年亚洲杯之巴林
日期:2015-04-02 09:32:18
发表于 2011-09-14 17:10 |显示全部楼层
牛人啊,从今天起,跟着学习。

论坛徽章:
0
发表于 2012-01-04 14:51 |显示全部楼层
感谢楼主、版主的整理
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP