- 论坛徽章:
- 0
|
靠,这么快。多谢楼上的。
回去下来看看。
现在的分区很简单,就
一个一百多M 的ext3的/boot 区。和
一个LVM大分区,里面是512M的LV0交换分区和 一个挂“/”的LV1
----------------------------------
[root@localhost ~]# fdisk /dev/sda
The number of cylinders for this disk is set to 1827.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 15.0 GB, 15032385536 bytes
255 heads, 63 sectors/track, 1827 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00015fcb
Device Boot Start End Blocks Id System
/dev/sda1 * 1 16 128488+ 83 Linux
/dev/sda2 17 1827 14546857+ 8e Linux LVM
-----------------------------------------------------------------
[root@localhost ~]# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol01
VG Name VolGroup00
LV UUID uV5kJB-ufsE-kiwV-bruI-9PNz-Ad0u-JmQGX1
LV Write Access read/write
LV Status available
# open 1
LV Size 13.31 GB
Current LE 426
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol00
VG Name VolGroup00
LV UUID kWb6ri-V2Cx-bTZ6-AS09-OO35-u0bZ-gvN9Vc
LV Write Access read/write
LV Status available
# open 1
LV Size 512.00 MB
Current LE 16
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1 |
|