- 论坛徽章:
- 0
|
这个startx是由vncserver 服务启动的,script 是/root/.vnc/xstartup。谢谢!
最近碰到一个问题:客户的一台机器,运行RHEL5,在init 3时也自动启动了startx,我需要发现是那个程序启动的。
ps -eaf 输出如下:
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Oct16 ? 00:00:00 init [3]
。。。。。。。。。。。
root 4695 1 0 Oct16 ? 00:00:00 xterm -geometry 80x24+10+10 -ls -title dc-psi-dev:1 (root) Desktop
root 4696 1 0 Oct16 ? 00:00:00 /bin/sh /usr/bin/startx
root 4697 1 0 Oct16 ? 00:00:00 gnome-session
root 4707 1 0 Oct16 ? 00:00:00 /usr/sbin/atd
root 4740 4696 0 Oct16 ? 00:00:00 xinit /etc/X11/xinit/xinitrc -- -auth /root/.serverauth.4696
root 4741 4740 0 Oct16 ? 00:00:54 X :0 -auth /root/.serverauth.4696
。。。。。。。。。。。。。。。。。。。。。。。。。。。。
我grep了/etc/init.d 和 /etc/rc.d目录下所有文件,没有发现‘startx', 'xterm', 'xinit' 任何一个单词。
同时/etc/inittab也没什么特别。
麻烦大家提示一下,还有什么地方可能启动了这个东东? 谢谢先。
#
# inittab This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
#
# Default runlevel. The runlevels used by RHS are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:
# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit
l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6
# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"
# If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"
# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
[ 本帖最后由 wjemail 于 2009-10-23 18:47 编辑 ] |
|