linux redhat9 安装qt4

liuyuunix

编译qt4.4版本 for linux redhat9 内核为2.4.20
1.        资源下载
Qt4.4.3下载
ftp://ftp.trolltech.no/qt/source ... ce-src-4.4.3.tar.gz
openssl-0.9.8b.tar.gz下载
http://down1.chinaunix.net/distfiles/openssl-0.9.8b.tar.gz

我是按照我计算机上安装的步骤
1.        把qt解压到/home目录中 tar xzvf qt-x11-opensource-src-4.4.3.tar.gz –C /homg
2.        把openssl解压到/home目录中 tar xzvf openssl-0.9.8b.tar.gz –C /home
3.        先安装openssl，因为在make qt的时候需要用到它，安装openssl的步骤如下
a)        ./configure –prefix=/usr –shared
b)        Make
c)        Make install
现在你安装好了openssl，现在该安装qt了
4.        cd /home/qt的目录
5.        ./configure –prefix=安装目录路径 –release
6.        make 这不需要很长的时间，主要根据具体的计算机来决定
7.        make install
共享你你已经安装成功了，你可以再你的安装qt的目录可以看到你需要的目录了

我在安装的过程遇到的问题
1.        开始我没有安装openssl有错，错误如下
   In file included from /usr/include/openssl/ssl.h:179,
from qsslsocket_openssl_p.h:83,
from qsslsocket_openssl_symbols_p.h:68,
from qsslcertificate.cpp:119:
/usr/include/openssl/kssl.h:72:18: krb5.h: 没有那个文件或目录
In file included from /usr/include/openssl/ssl.h:179,
from qsslsocket_openssl_p.h:83,
from qsslsocket_openssl_symbols_p.h:68,
from qsslcertificate.cpp:119:
/usr/include/openssl/kssl.h:132: 'krb5_enctype' is used as a type, but is not
defined as a type.
/usr/include/openssl/kssl.h:134: parse error before `*' token
/usr/include/openssl/kssl.h:147: parse error before `*' token
/usr/include/openssl/kssl.h:151: parse error before `*' token
/usr/include/openssl/kssl.h:153: parse error before `*' token
/usr/include/openssl/kssl.h:155: parse error before `*' token
/usr/include/openssl/kssl.h:157: parse error before `*' token
/usr/include/openssl/kssl.h:159: `krb5_context' was not declared in this scope
/usr/include/openssl/kssl.h:159: parse error before `,' token
/usr/include/openssl/kssl.h:160: `krb5_context' was not declared in this scope
/usr/include/openssl/kssl.h:160: parse error before `,' token
/usr/include/openssl/kssl.h:163: `krb5_timestamp' was not declared in this
scope
/usr/include/openssl/kssl.h:163: parse error before `,' token
/usr/include/openssl/kssl.h:165: parse error before `*' token
/usr/include/openssl/kssl.h:167: `krb5_enctype' was not declared in this scope
/usr/include/openssl/kssl.h:167: parse error before `,' token
make[1]: *** [.obj/release-shared/qsslcertificate.o] Error 1
make[1]: Leaving directory `/tmp/qt-x11-opensource-src-4.3.2/src/network'
make: *** [sub-network-make_default-ordered] Error 2
如果你安装的过程发现了这个错误，请你把你的openssl安装起

由于才开始学习 又什么不对的地方请各位大侠指导 谢谢

MMMIX

/usr/include/openssl/kssl.h:72:18: krb5.h: 没有那个文件或目录

你的系统中有 krb5.h 么？