关于wvdial的问题

areswry

wvdialconf /etc/wvdial.conf
运行上面的命令，系统会自动检测MODEM，然后将波特率什么的保存在/etc/wvdial.conf下面吧。
可我运行完之后，wvdialconf认不到我的MODEM：
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
[root@localhost etc]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2   S3   


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
我的MODEM是一款GRPS 无线MODEM，我已经在MINICOM下面试了AT指令都是通的。就是说MINICOM 是可以认到我的MODEM，但wvdialconf怎么会认不到呢。

kns1024wh

协议不匹配