uboot的readme导读(转)

kafernikov

uboot的readme导读(转)

UBOOT的移植其实并没有想象中的难，这主要归功于众多的工程师已经将常见的平台代码写入了UBOOT，我们所要做的就是一点小小的更改，在网上看了很多相关的移植，也听到有人说其实看了UBOOT的readme就可以了，只可惜全是英文的，实在是下不定决心。现在终于硬着头皮读了起来，一读才发现，原来网上所谓的移植过程其实全是照readme来搞的，readme已经把UBOOT的结构，配置选项，以及移植过程都做了详细的说明，只要照着搞，很容易把UBOOT移植到一个和先前平台相识的平台上来。
    本人不才，翻译了一部分，若有错误还请雅正！

    我下的版本是Uboot1.3.4
    uboot的相关文档和下载方法在
   
http://www.denx.de
这是官方网站哦 呵呵

开始是介绍Uboot的发展，下载地址，如何获得帮助，以及版本说明

Directory Hierarchy:
目录层次
====================

- board          Board dependent files
          开发板相关文件
- common     Misc architecture independent functions
          多体系结构独立函数
- cpu               CPU specific files
          CPU相关文件
  - 74xx_7xx        Files specific to Freescale MPC74xx and 7xx CPUs
                 Freescale MPC74XX的CPU相关文件
  - arm720t      Files specific to ARM 720 CPUs
                ARM720相关文件
  - arm920t      Files specific to ARM 920 CPUs
                ARM920相关文件
  - at91rm9200  Files specific to Atmel AT91RM9200 CPU
                AT91RM9200相关
  - imx        Files specific to Freescale MC9328 i.MX CPUs
              Freescale i.MX相关
  - s3c24x0    Files specific to Samsung S3C24X0 CPUs
  - arm925t    Files specific to ARM 925 CPUs
  - arm926ejs      Files specific to ARM 926 CPUs
  - arm1136   Files specific to ARM 1136 CPUs
  - at32ap      Files specific to Atmel AVR32 AP CPUs
  - i386     Files specific to i386 CPUs
  - ixp              Files specific to Intel XScale IXP CPUs
  - leon2          Files specific to Gaisler LEON2 SPARC CPU
  - leon3          Files specific to Gaisler LEON3 SPARC CPU
  - mcf52x2   Files specific to Freescale ColdFire MCF52x2 CPUs
  - mcf5227x      Files specific to Freescale ColdFire MCF5227x CPUs
  - mcf532x   Files specific to Freescale ColdFire MCF5329 CPUs
  - mcf5445x      Files specific to Freescale ColdFire MCF5445x CPUs
  - mcf547x_8x  Files specific to Freescale ColdFire MCF547x_8x CPUs
  - mips       Files specific to MIPS CPUs
  - mpc5xx  Files specific to Freescale MPC5xx  CPUs
  - mpc5xxx       Files specific to Freescale MPC5xxx CPUs
  - mpc8xx  Files specific to Freescale MPC8xx  CPUs
  - mpc8220       Files specific to Freescale MPC8220 CPUs
  - mpc824x       Files specific to Freescale MPC824x CPUs
  - mpc8260       Files specific to Freescale MPC8260 CPUs
  - mpc85xx       Files specific to Freescale MPC85xx CPUs
  - nios Files specific to Altera NIOS CPUs
  - nios2      Files specific to Altera Nios-II CPUs
  - ppc4xx   Files specific to AMCC PowerPC 4xx CPUs
  - pxa         Files specific to Intel XScale PXA CPUs
  - s3c44b0  Files specific to Samsung S3C44B0 CPUs
  - sa1100    Files specific to Intel StrongARM SA1100 CPUs
- disk            Code for disk drive partition handling
          磁盘驱动，及分区操作的代码
- doc               Documentation (don't expect too much)
          文档（不要期待太多（搞不懂为什么了?））
- drivers Commonly used device drivers
          通用设备驱动
- dtt                Digital Thermometer and Thermostat drivers
          数字温度器及调温装置驱动
- examples    Example code for standalone applications, etc.
            独立应用程序的例子
- include         Header Files
            头文件
- lib_arm         Files generic to ARM    architecture
            ARM体系结构通用的文件
- lib_avr32    Files generic to AVR32     architecture
- lib_generic Files generic to all      architectures
              所有体系结构通用的文件
- lib_i386      Files generic to i386   architecture
- lib_m68k    Files generic to m68k architecture
- lib_mips     Files generic to MIPS       architecture
- lib_nios      Files generic to NIOS       architecture
- lib_ppc       Files generic to PowerPC architecture
- lib_sparc     Files generic to SPARC    architecture
- libfdt   Library files to support flattened device trees
          支持平板设备树的库文件
- net              Networking code
         网络代码
- post            Power On Self Test
          上电自检
- rtc        Real Time Clock drivers
          实时时钟驱动
- tools           Tools to build S-Record or U-Boot images, etc.
          编译S-Record和U-Boot镜像的工具
- api
          1.3版本的UBOOT还增加了一个API的文件夹，
          这里放的是一些扩展应用的独立的API函数


第一步：
Selection of Processor Architecture and Board Type:
选择处理器架构和板类型：
---------------------------------------------------

For all supported boards there are ready-to-use default
configurations available; just type "make _config".
对所有已至此的板都已经有可用的默认配置，只要执行：
make _config

下面是例子
Example: For a TQM823L module type:

       cd u-boot
       make TQM823L_config

For the Cogent platform, you need to specify the CPU type as well;
e.g. "make cogent_mpc8xx_config". And also configure the cogent
directory according to the instructions in cogent/README.
对于加强型平台还要指定CPU类型，请阅读cogent/READM

····················

第二步
Configuration Options:
配置选项：
----------------------

Configuration depends on the combination of board and CPU type; all
such information is kept in a configuration file
配置依赖于板和CPU，所有配置设置信息保存在：
"include/configs/.h".

Example: For a TQM823L module, all configuration settings are in
"include/configs/TQM823L.h".


Many of the options are named exactly as the corresponding Linux
kernel configuration options. The intention is to make it easier to
build a config tool - later.


The following options need to be configured:
以下的选项需要被配置：
这里MPC的配置比较多，如果是SMDK2410的话配置会少很多

- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX.
CPU类型：正确地定义一个种类，比如：CONFIG_MPC85XX

- Board Type:      Define exactly one, e.g. CONFIG_MPC8540ADS.
板类型：比如：CONFIG_MPC8540ADS

- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
              Define exactly one, e.g. CONFIG_ATSTK1002
CPU子类

- CPU Module Type: (if CONFIG_COGENT is defined)
              Define exactly one of
              CONFIG_CMA286_60_OLD
CPU模型
--- FIXME --- not tested yet:
              CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P,
              CONFIG_CMA287_23, CONFIG_CMA287_50

- Motherboard Type: (if CONFIG_COGENT is defined)
              Define exactly one of
              CONFIG_CMA101, CONFIG_CMA102
主板

- Motherboard I/O Modules: (if CONFIG_COGENT is defined)
              Define one or more of
              CONFIG_CMA302

·······


第二步
Building the Software:
编译软件
======================

Building U-Boot has been tested in several native build environments
and in many different cross environments. Of course we cannot support
all possibly existing versions of cross development tools in all
(potentially obsolete) versions. In case of tool chain problems we
recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK)
which is extensively used to build and test U-Boot.
UBOOT已经在很多编译环境下编译成功，但我们不保证所有的交叉编译工具都能使用，如果发生问题，请用ELDK编译工具编译和测试UBOOT
http://www.denx.de/wiki/DULG/ELDK


If the system board that you have is not listed, then you will need
to port U-Boot to your hardware platform.
若你的系统板没有列出来，那你将移植UBOOT到你的硬件平台上
To do this, follow these steps:
遵照一下步骤进行移植：

1.  Add a new configuration option for your board to the toplevel
    "Makefile" and to the "MAKEALL" script, using the existing
entries as examples.
依照已存在的入口在顶层"Makefile" 和 "MAKEALL"脚本中
增加你板子的配置选项
Note that here and at many other places
    boards and other names are listed in alphabetical sort order. Please
keep this order.
板和其他名字都是按字母排序的，请遵照这种顺序
2.  Create a new directory to hold your board specific code. Add any
    files you need. In your board directory, you will need at least
the "Makefile", a ".c", "flash.c" and "u-boot.lds".
创建一个新的目录来保存你板子的代码，增加你需要的文件。
在你的目录里至少需要"Makefile" 、".c"、 "flash.c"、"u-boot.lds"
3.  Create a new configuration file "include/configs/.h" for
your board
为你的板子创建一个新的配置文件"include/configs/.h"
3.  If you're porting U-Boot to a new CPU, then also create a new
directory to hold your CPU specific code. Add any files you need.
若你移植UBOOT到一个新的CPU，你还需建立一个新的目录
来保存你CPU的代码，和文件
4.  Run "make _config" with your new name.
    用你的新名运行"make _config"，
5.  Type "make", and you should get a working "u-boot.srec" file
to be installed on your target system.
得到映像文件
6.  Debug and solve any problems that might arise.
[Of course, this last step is much harder than it sounds.]
调试


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u2/83043/showart_1359546.html