- 论坛徽章:
- 0
|
Inspecting /boot/System.map-2.6.13-15-default
Loaded 24236 symbols from /boot/System.map-2.6.13-15-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
<4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<6>found SMP MP-table at 000f4ae0
<7>On node 0 totalpages: 65520
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 61424 pages, LIFO batch:31
<7> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.2 present.
<7>ACPI: RSDP (v000 IntelR ) @ 0x000f6560
<7>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
<7>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff30c0
<7>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff6f80
<7>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x408
<6>ACPI: local apic disabled
<6>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4> rocessor #0 15:3 APIC version 17
<6>I/O APIC #2 Version 17 at 0xFEC00000.
<6>rocessors: 1
<4>Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hdd2 vga=0x31a selinux=0 resume=/dev/hdd1 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>ID hash table entries: 1024 (order: 10, 16384 bytes)
<4>Detected 2399.503 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 253904k/262080k available (2028k kernel code, 7556k reserved, 700k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 4853.89 BogoMIPS (lpj=9707793)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<6>mtrr: v2.0 (20020519)
<4>CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 04
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1742k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0a20)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>CI: PCI BIOS revision 2.10 entry at 0xfb070, last bus=1
<6>CI: Using configuration type 1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>CI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<6>CI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:01:00.0
<6>CI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 15 devices
<6>CI: Using ACPI for IRQ routing
<6>CI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>pnp: 00:0d: ioport range 0x400-0x4bf could not be reserved
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: d000-dfff
<6> MEM window: ec000000-edffffff
<6> PREFETCH window: e0000000-e7ffffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(1224688180.920:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:a510
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
<4>Console: switching to colour frame buffer device 158x59
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303 S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>PCI0 HUB0 UAR1 UAR2 USB0 USB1 USB2 USBE MODM
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
<6>ICH4: IDE controller at PCI slot 0000:00:1f.1
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
<6>ICH4: chipset revision 2
<6>ICH4: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda MA, hdb:pio
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
<7>Probing IDE interface ide0...
<4>hda: ST340016A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<6>hda: cache flushes not supported
<6> hda: hda1 hda2 < hda5 hda6 >
<7>Probing IDE interface ide1...
<4>hdc: BENQ CDROM 652T, ATAPI CD/DVD-ROM drive
<4>hdd: Maxtor 32049H2, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdd: max request size: 128KiB
<6>hdd: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, UDMA(100)
<6>hdd: cache flushes not supported
<6> hdd: hdd1 hdd2
<6>ACPI: CPU0 (power states: C1[C1])
<4> ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
<6>ACPI: Thermal Zone [THRM] (22 C)
<6>ACPI: Fan [FAN] (on)
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<5>ReiserFS: hdd2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdd2: using ordered data mode
<5>ReiserFS: hdd2: journal params: device hdd2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdd2: checking transaction log (hdd2)
<5>ReiserFS: hdd2: Using r5 hash to sort names
<6>bootsplash: status on console 0 changed to on
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 1052216k swap on /dev/hdd1. Priority:-1 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: devel@redhat.com[/email]
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Oct 22 15:09:49 2008
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneMounting shared memory FS on /dev/shmdone
Activating swap-devices in /etc/fstab...
doneActivating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true,codepage=936)
/dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true,codepage=936)
/dev/hda6 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true,codepage=936)
done<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=788 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd2 _=/sbin/startproc DAEMON=/sbin/udevd ]
Starting udevd done
Setting up the CMOS clockdone
Loading required kernel modules
doneSetting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Coldplug
Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer'
processing eventsdone
<notice>killproc: kill(2049,29)
Creating /var/log/boot.msg
donedone
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(2049,3)
[ 本帖最后由 lidiqian 于 2008-10-22 16:00 编辑 ] |
|
免费注册
发表于 2008-10-22 15:37