安装CA备份软件报错，哪位老大帮忙给看看。

shinobi

主程序已经安装好，进一步设置安装ingres时报错，检查share memory正常。报错信息如下：

ould not create the system segment, does your kernel have enough
shared memory or has this program already been run?
CSMTinitiate: Error (00011221) in CS_map_sys_segment
Fri Nov 14 10:36:01 2003 E_CL2537_CS_MAP_SSEG_FAIL      Failure in attempt to ma
causes of this problem are: 1) user does not have the required privileges; 2) th
he CSINSTALL utility can be used to install the shared memory segment.
rm: /home/ingressii/ingres/log/ is a directory
/home/ingressii/ingres/utility/ipcclean: /home/ingressii/ingres/files/memory: do

Unable to install shared memory (csinstall failed).

Could not create the system segment, does your kernel have enough
shared memory or has this program already been run?
Fri Nov 14 10:36:02 2003 E_CL2537_CS_MAP_SSEG_FAIL      Failure in attempt to macauses of this problem are: 1) user does not have the required privileges; 2) thhe CSINSTALL utility can be used to install the shared memory segment.
/home/ingressii/ingres/utility/ipcclean: /home/ingressii/ingres/files/memory: do
Installing Terminal Monitor utility files...

Ingres/ingstart

The Ingres license is invalid.


Ingres installation failed.
Exit

哪位老大能分析出原因啊？

cole

把 Ingres用户和目录备份一下后，把Ingres用户和目录一起删了
再做csetup

mkwf

没有调整共享内存、消息队列、信号量能系统核心参数。
在这些软件的安装文档里面有最低需求的。

shinobi

share memory 已经确认过了，还有，csetup早进行过多次了。还是不行，各位老大有没有相关经验啊？

cole

/etc/system 这文件修改了吗？
        forceload: sys/msgsys
        forceload: sys/semsys
        forceload: sys/shmsys
        set semsys:seminfo_semmap=256
        set semsys:seminfo_semmni=256
        set semsys:seminfo_semmns=1024
        set semsys:seminfo_semmnu=128
        set semsys:seminfo_semmsl=128
        set semsys:seminfo_semopm=20
        set semsys:seminfo_semume=128
        set semsys:seminfo_semusz=96
        set semsys:seminfo_semvmx=128000
        set semsys:seminfo_semaem=16384
        set shmsys:shminfo_shmmax=1000000000
        set shmsys:shminfo_shmmin=512
        set shmsys:shminfo_shmmni=720
        set shmsys:shminfo_shmseg=120
        set msgsys:msginfo_msgmap=2048
        set msgsys:msginfo_msgmax=32768
        set msgsys:msginfo_msgmnb=65535
        set msgsys:msginfo_msgmni=128
        set msgsys:msginfo_msgssz=32
        set msgsys:msginfo_msgtql=2048
        set msgsys:msginfo_msgseg=32767
        set  rlim_fd_cur=1024
        set  rlim_fd_max=1024
如果你是重新安装的话，Ingres用户和目录一起删了
直接root登陆solais再做一次csetup

shinobi

都已经修改过了。问题是sysdef显示配置修改了，但是ipcs显示当前系统正在使用的配置没有生效。已经reboot很多回了。...

mkwf

ipcs 只显示当前系统使用的情况。
sysdef显示的是上限。