i was trubled by this too! need help -come on

(II) NV(0): Modeline "576x432" 54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) NV(0): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432" 52.49  576 612 676 776  432 432 434 451 doublescan -hsync +vsync
(**) NV(0): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "576x432" 48.38  576 612 672 768  432 432 434 450 doublescan -hsync +vsync
(**) NV(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "576x432" 40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x384": 51.5 MHz, 60.2 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x384" 51.49  640 680 748 856  384 384 386 401 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x384": 47.5 MHz, 56.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "640x384" 47.49  640 676 744 848  384 384 386 400 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "640x384" 40.07  640 672 740 840  384 384 386 397 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x360": 47.8 MHz, 56.4 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x360" 47.83  640 676 744 848  360 360 362 376 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x360": 44.5 MHz, 52.5 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "640x360" 44.52  640 676 744 848  360 360 362 375 doublescan -hsync +vsync
(**) NV(0): *Default mode "640x360": 37.2 MHz, 44.8 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x360" 37.24  640 668 736 832  360 360 362 373 doublescan -hsync +vsync
(**) NV(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "512x384" 39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0): Display dimensions: (340, 270) mm
(**) NV(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xc1000000 - 0xc1ffffff (0x1000000) MX[B]
[1] 0 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B]
[2] 0 0 0xc0000000 - 0xc0ffffff (0x1000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd0010000 - 0xd00100ff (0x100) MX[B]
[8] -1 0 0xd0102000 - 0xd01020ff (0x100) MX[B]
[9] -1 0 0xd0101000 - 0xd01011ff (0x200) MX[B]
[10] -1 0 0xd0100000 - 0xd01003ff (0x400) MX[B]
[11] -1 0 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[20] -1 0 0x00000500 - 0x0000051f (0x20) IX[B]
[21] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B]
[22] -1 0 0x0000eb00 - 0x0000eb03 (0x4) IX[B]
[23] -1 0 0x0000ea00 - 0x0000ea07 (0x

IX[B]
[24] -1 0 0x0000e900 - 0x0000e903 (0x4) IX[B]
[25] -1 0 0x0000e800 - 0x0000e807 (0x

IX[B]
[26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f7 (0x

IX[B]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[30] -1 0 0x000001f0 - 0x000001f7 (0x

IX[B]
[31] -1 0 0x0000e500 - 0x0000e53f (0x40) IX[B]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[33] -1 0 0x0000e200 - 0x0000e21f (0x20) IX[B]
[34] -1 0 0x0000e100 - 0x0000e11f (0x20) IX[B]
[35] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[36] -1 0 0x0000e300 - 0x0000e31f (0x20) IX[B]
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xb0000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules//extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "

rotocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us+inet"
(**) Keyboard0: XkbLayout: "us+inet"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded