vconfig 添加的interface 的MAC一样,怎么改?

sulin515

我在debian 上用vconfig 添加了 几个interface但是我发现几个interface 的MAC一样的.
eth1.9    Link encap:Ethernet  HWaddr 00:01:02:96:a8:78
          inet addr:10.90.36.193  Bcast:10.90.36.255  Mask:255.255.255.192
          inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2062356 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1846337 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:511367685 (487.6 MiB)  TX bytes:1450916128 (1.3 GiB)

eth1.10   Link encap:Ethernet  HWaddr 00:01:02:96:a8:78  
          inet addr:10.90.1.121  Bcast:10.90.1.123  Mask:255.255.255.252
          inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2470 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:123500 (120.6 KiB)  TX bytes:492 (492.0 B)

eth1.11   Link encap:Ethernet  HWaddr 00:01:02:96:a8:78  
          inet addr:10.90.36.65  Bcast:10.90.36.127  Mask:255.255.255.192
          inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:15469984 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10582829 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:361547919 (344.7 MiB)  TX bytes:845915815 (806.7 MiB)

eth1.9    Link encap:Ethernet  HWaddr 00:01:02:96:a8:78             inet addr:10.90.36.193  Bcast:10.90.36.255  Mask:255.255.255.192           inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:2062356 errors:0 dropped:0 overruns:0 frame:0           TX packets:1846337 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:511367685 (487.6 MiB)  TX bytes:1450916128 (1.3 GiB) eth1.10   Link encap:Ethernet  HWaddr 00:01:02:96:a8:78             inet addr:10.90.1.121  Bcast:10.90.1.123  Mask:255.255.255.252           inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:2470 errors:0 dropped:0 overruns:0 frame:0           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:123500 (120.6 KiB)  TX bytes:492 (492.0 B) eth1.11   Link encap:Ethernet  HWaddr 00:01:02:96:a8:78             inet addr:10.90.36.65  Bcast:10.90.36.127  Mask:255.255.255.192           inet6 addr: fe80::201:2ff:fe96:a878/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:15469984 errors:0 dropped:0 overruns:0 frame:0           TX packets:10582829 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0           RX bytes:361547919 (344.7 MiB)  TX bytes:845915815 (806.7 MiB)

我的想法是,把eth1.9 eth1.10 eth1.11 都设置成不同的MAC,同志们想想办法呀.....

sulin515

这么多人看了,都没人知道吗?我只是想在创建eth1.9 eth1.10 eth1.11 后,设置它们成不同的MAC,

ggyyunix

ifconfig eth1.9 hw ether MAC
这样不行吗