redhat as4 up4 bond0 网卡 出现: bonding: bond0: released all slaves 问题!

qsblj

我在suse上也发现一样的问题。

环境如下：
IBM X3755
SLES 9 SP3
也是四个网卡，两两bonding ，分别是bnx2和tg3模块的。
未安装存储之前是好的。安装完之后就有问题。

[ 本帖最后由 qsblj 于 2008-11-12 17:52 编辑 ]

qsblj

补充说一下，HBA卡是Qlogic的。明天去客户那里验证一下。

qsblj

https://www-304.ibm.com/systems/ ... mp;brandind=5000020

Symptom
Ethernet packets can be lost when using the Linux TG3 driver and the bonding driver when the bonding driver is set to active-backup mode (Mode 1) and the ARP_INTERVAL parameter is used. This issue happens immediately after failover to the backup port. The secondary port link status may toggle between connected and not connected. Pings to the affected port will show sporadic timeouts. Throughput of the affected port will be negatively impacted.



Solution
Instead of using the ARP_INTERVAL parameter of the Linux bonding driver, use the parameter miimon=100 as recommended by the Linux bonding driver.