网卡驱动加载问题

NICKY.BOY

我重新编译了2.4版的内核，网卡是e1000的，我编译时把该驱动直接编译进内核，而不是模块形式的。
重新启动以后，发现网卡没有被识别到。这是为什么？
下面是我的编译选项。请大家指点一下
#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
CONFIG_E100=y
......
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
......
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_MYRI_SBUS is not set
......
# CONFIG_SLIP is not set

enjoygoodboy

ifconfig eth0 也不能看见吗？如果不能看见你可以用modprobe e1000，加载看看，如果真的不行进/lib/moduels/kernel/driver目录/net里insmod e1000.o然后加载成功没任何提示的可以lsmod查看是否被加载了，然后ifconfig eth0查看如果有MAC物理地址那就正确了。