Centos iscsi with NetApp

liukaidz

                                There are several step need to finish.
Two sides
Netapp:
add lun , add igroup, add nodename to igroup ,lun map id.
also you can use "lun setup " to install intelligent.
Host:(cenos5)
1.install iscsi-initiator-utils
2.iscsi-iname ---------generate a soft nodename
3.iscsiadm --mode discovery --type sendtargets --portal 192.168.0.10-----------discover target
4.iscsiadm --mode node --targetname iqn.1992-08.com.netapp:sn.99930701 --portal 192.168.0.10:3260 --login    ---------------------login and add attach lun to host
5.fdisk
6.mkfs
Old version need config /etc/iscsi.conf.need add
Continuous=no
HeaderDigest=never
DataDigest=never
ConnFailTimeout=180
ImmediateData=yes
DiscoveryAddress= over!
               
               
               
               
               
               
               

本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/11438/showart_336690.html