求教如何用cacti监控lvs

zhangning_1999

请问那位大侠有配置caci监控lvs的实际经验，以及如何配置，不要cacti的基本配置

wysilly

你的目的是什么,想监控那些东西?

wysilly

有一个网站你可以看一下.
http://kb.linuxvirtualserver.org/wiki/Net-SNMP-LVS-Module

zhangning_1999

这个网站我看过,它上面所有的东西都弄出来了,但不知道怎么把它加入到CACTI中,不过还是谢谢你了

wysilly

不是有了1.3.0.什么什么了吗?
有了这个在cacti管理页面里就可以增加相应的数据源了.
http://blog.chinaunix.net/u/19540/showart_197968.html

[ 本帖最后由 wysilly 于 2007-4-26 13:46 编辑 ]

zhangning_1999

在http://www.asyd.net/cacti/上找到两个模版,但是倒入进去后显示的图片不对,
还请wysilli大虾具体说明一下你是如何在cacti中添加的,snmpwalk显示的结果如下:

[root@lvssnmp ~]# snmpwalk -c public -v 2c -m LVS-MIB localhost 1.3.6.1.4.1.8225.4711|more
LVS-MIB::lvsVersion.0 = STRING: "1.2.0"
LVS-MIB::lvsNumServices.0 = INTEGER: 1
LVS-MIB::lvsHashTableSize.0 = INTEGER: 4096
LVS-MIB::lvsTcpTimeOut.0 = INTEGER: 900
LVS-MIB::lvsTcpFinTimeOut.0 = INTEGER: 120
LVS-MIB::lvsUdpTimeOut.0 = INTEGER: 300
LVS-MIB::lvsDaemonState.0 = INTEGER: none(0)
LVS-MIB::lvsServiceNumber.1 = INTEGER: 1
LVS-MIB::lvsServiceSchedType.1 = STRING: "rr"
LVS-MIB::lvsServiceProto.1 = INTEGER: tcp(6)
LVS-MIB::lvsServiceAddr.1 = IpAddress: 192.168.0.100
LVS-MIB::lvsServicePort.1 = INTEGER: 80
LVS-MIB::lvsServiceFWMark.1 = INTEGER: undefined(0)
LVS-MIB::lvsServicePersistTimeout.1 = INTEGER: 600
LVS-MIB::lvsServicePersistNetmask.1 = IpAddress: 255.255.255.255
LVS-MIB::lvsServiceNumDests.1 = INTEGER: 2
LVS-MIB::lvsServiceStatsConns.1 = Counter32: 0
LVS-MIB::lvsServiceStatsInPkts.1 = Counter32: 0
LVS-MIB::lvsServiceStatsOutPkts.1 = Counter32: 0
LVS-MIB::lvsServiceStatsInBytes.1 = Counter64: 0
LVS-MIB::lvsServiceStatsOutBytes.1 = Counter64: 0
LVS-MIB::lvsServiceRateCps.1 = Gauge32: 0
LVS-MIB::lvsServiceRateInPPS.1 = Gauge32: 0
LVS-MIB::lvsServiceRateOutPPS.1 = Gauge32: 0
LVS-MIB::lvsServiceRateInBPS.1 = Gauge32: 0
LVS-MIB::lvsServiceRateOutBPS.1 = Gauge32: 0
LVS-MIB::lvsRealServiceNumber.1.1 = INTEGER: 1
LVS-MIB::lvsRealServiceNumber.1.2 = INTEGER: 1
LVS-MIB::lvsRealServerNumber.1.1 = INTEGER: 1
LVS-MIB::lvsRealServerNumber.1.2 = INTEGER: 2
LVS-MIB::lvsRealServerAddr.1.1 = IpAddress: 192.168.0.12
LVS-MIB::lvsRealServerAddr.1.2 = IpAddress: 192.168.0.8
LVS-MIB::lvsRealServerPort.1.1 = INTEGER: 80
LVS-MIB::lvsRealServerPort.1.2 = INTEGER: 80
LVS-MIB::lvsRealServerFlags.1.1 = INTEGER: 387
LVS-MIB::lvsRealServerFlags.1.2 = INTEGER: 385
LVS-MIB::lvsRealServerWeight.1.1 = INTEGER: 0
LVS-MIB::lvsRealServerWeight.1.2 = INTEGER: 0
LVS-MIB::lvsRealStatsConns.1.1 = Counter32: 0
LVS-MIB::lvsRealStatsConns.1.2 = Counter32: 0
LVS-MIB::lvsRealStatsInPkts.1.1 = Counter32: 0
LVS-MIB::lvsRealStatsInPkts.1.2 = Counter32: 0
LVS-MIB::lvsRealStatsOutPkts.1.1 = Counter32: 0
LVS-MIB::lvsRealStatsOutPkts.1.2 = Counter32: 0
LVS-MIB::lvsRealStatsInBytes.1.1 = Counter64: 0
LVS-MIB::lvsRealStatsInBytes.1.2 = Counter64: 0
LVS-MIB::lvsRealStatsOutBytes.1.1 = Counter64: 0
LVS-MIB::lvsRealStatsOutBytes.1.2 = Counter64: 0
LVS-MIB::lvsRealRateCps.1.1 = Gauge32: 0
LVS-MIB::lvsRealRateCps.1.2 = Gauge32: 0
LVS-MIB::lvsRealRateInPPS.1.1 = Gauge32: 0
LVS-MIB::lvsRealRateInPPS.1.2 = Gauge32: 0
LVS-MIB::lvsRealRateOutPPS.1.1 = Gauge32: 0
LVS-MIB::lvsRealRateOutPPS.1.2 = Gauge32: 0
LVS-MIB::lvsRealRateInBPS.1.1 = Gauge32: 0
LVS-MIB::lvsRealRateInBPS.1.2 = Gauge32: 0
LVS-MIB::lvsRealRateOutBPS.1.1 = Gauge32: 0
LVS-MIB::lvsRealRateOutBPS.1.2 = Gauge32: 0
LVS-MIB::lvsRealEntry.17 = No more variables left in this MIB View (It is past the end of the MIB tree)
[root@lvssnmp ~]#
谢谢

zhangning_1999

另，通过http://www.asyd.net/cacti/的模版显示的图片如下，不过肯定不对

kaka_sun

一个字:"牛"
我觉得cacti真的不错

wysilly

如何自定数据模板:

如图1.


填写好了,进入到图2


oid就是1.3.什么的信息(mib).下面的就简单了.

[ 本帖最后由 wysilly 于 2007-4-29 00:26 编辑 ]

zhangning_1999

那么cactiuser的crontab需要改吗?
我的如下:
[root@lvssnmptest ~]# crontab -l -u cactiuser
*/5 * * * * cactiuser /opt/lampp/bin/php /opt/lampp/htdocs/cacti/poller.php
[root@lvssnmptest ~]#
这个应该是不需要改的吧