- 论坛徽章:
- 0
|
(1)如果你使用的是ADSL外猫,RH的系统可以使用adsl-setup 命令来设置拨号,其他操作系统可以使用pppoeconf 来设立拨号连接
上述命令都是在你取得根用户权限的情况下
>>> Enter your PPPoE user name: ——此处输入拨号帐号的用户名
>>> Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethn, where n is a number. (default eth0): ——输eth0(假设你的网卡使用的是eth0,大多数板载网卡都是eth0)
>>> Enter the demand value (default no): ——输no
>>> Enter the DNS information here: ——(视当地运营商的DNS服务器IP而定,一般这个可以通过询问当地的运营商得到)
>>> Please enter your PPPoE password: ——输网通用户口令
>>> Choose a type of firewall (0-2): ——输0
>>> Accept these settings and adjust configuration files (y/n)? ——输y
好像还有一个开机启动选项,忘了是怎么说的了到那里你选yes就可以开机启动了
(2)如果是windows作主机好像很简单设定好IP地址,你把linux的网卡那部分做成静态IP地址使用分配给你的IP地址就可以了 |
|