FreeRadius和MySQL集成遇到问题，附Debug信息。请各位帮忙看看

popofox

测试环境为FreeRadius1.1.3和MySQL5.0.27，MySQL工作正常。

现在的问题Radius无法正确的验证用户，大概是哪个环节有问题？调试信息中是不是说明现在的验证方式还是从本地用户里面查找用户名和密码？
请高手指点迷津。

现在是用-X参数运行radiusd时，对一个客户端进行认证的全部信息：


Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 172.23.140.5:1024, id=19, length=123
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 23
NAS-Port-Type = Ethernet
User-Name = "test"
Calling-Station-Id = "00:01:6C:8C:83:24"
Called-Station-Id = "PPPoE test"
NAS-Port-Id = "ether1"
User-Password = "test"
NAS-Identifier = "iGate1500"
NAS-IP-Address = 172.23.140.5
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 2
users: Matched entry DEFAULT at line 171
users: Matched entry DEFAULT at line 183
modcall[authorize]: module "files" returns ok for request 2
radius_xlat: 'test'
rlm_sql (sql): sql_set_user escaped user --> 'test'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'test' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 2
radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'test' ORDER BY id'
radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'test' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 2
modcall[authorize]: module "sql" returns ok for request 2
modcall: leaving group authorize (returns ok) for request 2
auth: type Local
auth: user supplied User-Password does NOT match local User-Password
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.23.140.5:1024, id=19, length=123
Sending Access-Reject of id 19 to 172.23.140.5 port 1024
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 5 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 19 with timestamp 457a5ec1
Nothing to do. Sleeping until we see a request.