为什么我的模块asm下的文件都不能找到

hz2580

[hmp@lemigo tlv320aic1106]$ make
cc  -c acdge_ssc_dma.c acdge_ssc_dma.h acdge_pdc.h acdge_audio_queue.h
acdge_ssc_dma.c:6:26: asm/hardware.h: 没有那个文件或目录
acdge_ssc_dma.c:8:24: asm/memory.h: 没有那个文件或目录
In file included from acdge_ssc_dma.c:9:
acdge_audio_queue.h:6:25: asm/uaccess.h: 没有那个文件或目录
acdge_ssc_dma.c: In function `ssc_dma_Init':
acdge_ssc_dma.c:17: error: `AT91_VA_BASE_SSC0' undeclared (first use in this function)
acdge_ssc_dma.c:17: error: (Each undeclared identifier is reported only once
acdge_ssc_dma.c:17: error: for each function it appears in.)
In file included from acdge_ssc_dma.h:7:
acdge_audio_queue.h:6:25: asm/uaccess.h: 没有那个文件或目录
acdge_audio_queue.h:6:25: asm/uaccess.h: 没有那个文件或目录
make: *** [acdge_ssc_dma.o] 错误 1
[hmp@lemigo tlv320aic1106]$




我发现只要是asm下面的就不能找到,其实这个文件却实在存.

下面是我的makefile
KERNELDIR =        /home/hmp/MyProject/VideoPhone/linux
include $(KERNELDIR)/.config
KINCLUDE   = /usr/local/arm/3.4.1/arm-linux/include
KERNEL_ACFILE = $(KINCLUDE)/linux/autoconf.h
KERNEL_MODVERSIONSFILE = $(KINCLUDE)/linux/modversions.h

CFAGS=-D__KERNEL__ -DMODULE -I$(KERNELDIR)/include -I$(KINCLUDE)/include -O -Wall

VERSIONFILE=$(INCLUDEDIR)/linux/version.h
INSTALLDIR = /lib/modules/tlv320aic

all:tlv320aic.o
                                       
tlv320aic.o: acdge_audio_queue.o acdge_ssc_dma.o
        $(LD) -r $^ -o $@

acdge_ssc_dma.o: acdge_ssc_dma.c acdge_ssc_dma.h acdge_pdc.h  acdge_audio_queue.h
        $(CC) $(CFLAGS) -c $^

acdge_audio_queue.o: acdge_audio_queue.c  acdge_audio_queue.h
        $(CC) $(CFLAGS) -c $^

.PHONY: clean
clean:
        -rm -f *.ko *.ko

install:
        install -d $(INSTALLDIR)
        install -c $(OBJS) $(INSTALLDIR)



望知道的指点一下.