免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 843 | 回复: 1
打印 上一主题 下一主题

急问 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2006-07-17 14:43 |只看该作者 |倒序浏览
我的 U盘挂载不了,系统显示下面信息:
Disk /dev/sdb: 125 MB, 125682176 bytes
4 heads, 60 sectors/track, 1022 cylinders
Units = cylinders of 240 * 512 = 122880 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sdb1   ?   7790715   8493588  84344761   69  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(68, 13, 10) logical=(7790714, 0, 6)
Partition 1 has different physical/logical endings:
     phys=(288, 115, 43) logical=(8493587, 0, 7)
Partition 1 does not end on cylinder boundary.
/dev/sdb2   ?   7089665  14880838 934940732+  73  Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(371, 114, 37) logical=(7089664, 2, 2)
Partition 2 has different physical/logical endings:
     phys=(366, 32, 33) logical=(14880837, 1, 6)
Partition 2 does not end on cylinder boundary.
/dev/sdb3   ?        11        11         0   74  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(371, 114, 37) logical=(10, 2, 54)
Partition 3 has different physical/logical endings:
     phys=(372, 97, 50) logical=(10, 2, 53)
Partition 3 does not end on cylinder boundary.
/dev/sdb4             1  14312973 1717556736    0  Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 0) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
     phys=(0, 0, 0) logical=(14312972, 3, 12)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
不知道是什么意思?谢谢

论坛徽章:
0
2 [报告]
发表于 2006-07-17 16:12 |只看该作者
顯示的分區數字順序和硬碟的數字順序不相符

請留意標題
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP