- 论坛徽章:
- 0
|
已更新下载地址
网上流传着一个<<流媒体Helix Server详细安装,配置>>的文章,详细讲解了Helix_DNA_Server_10.1.tar.gz的安装方法,今天我在RHEL AS 4.2上成功安装了Helix Server Unlimited v11.0.1.1884 For Linux,这个版本新一些,使用方法也有一点点不同于Helix_DNA_Server_10.1,我把安装与设置过程记录了下来,分享一下,但愿不是狗尾续貂.....
Helix Server Unlimited v11.0.1.1884 For Linux 特别版
下载地址:http://down.chinaz.com/s/9415.asp
(站长之家还有其他版本可下载。linux公社有Helix_DNA_Server_10.1可下载,不过我喜欢新些的版本)
汉化补丁 下载地址:http://www.helix.cn/download/Helix_Administrator_CHS_2.01.rar (解压密码:www.helix.cn)
以上两个文件都是用rar压缩的,你可以在你的linux中系统装一个rar_forlinux来解压,也可以winrar解压好再到linux系统中使用,我已经解压好了,解压后的文件都放在了同一个文件夹内.
下面是安装过程
- [root@rhel ~]# cd helixserver/
- [root@rhel helixserver]# ls
- crack HelixAdministrator HelixServerUnlimited11_Linux.zip setup.tar.gz
- [root@rhel helixserver]# tar xzvf setup.tar.gz
- helix-server-retail-11.01-rhel4-setup.bin
- HelixProxyAdmin.pdf
- HelixProxyConfig.pdf
- HelixServerAdmin.pdf
- HelixServerConfig.pdf
- [root@rhel helixserver]# ls
- crack HelixServerConfig.pdf
- HelixAdministrator helix-server-retail-11.01-rhel4-setup.bin
- HelixProxyAdmin.pdf HelixServerUnlimited11_Linux.zip
- HelixProxyConfig.pdf setup.tar.gz
- HelixServerAdmin.pdf
- [root@rhel helixserver]# chmod +x helix-server-retail-11.01-rhel4-setup.bin
- [root@rhel helixserver]# ./helix-server-retail-11.01-rhel4-setup.bin
- Extracting files for Helix installation........................
- Welcome to the Helix Server 11.0 (11.0.1.1884) Setup for UNIX
- Setup will help you get Helix Server running on your computer.
- [ Press [Enter] to continue... ]
- If a Helix Server license key file has been sent to you,
- please enter its directory path below. If you have not
- received a Helix Server license key file, then this server
- WILL NOT OPERATE until a license key file is placed in
- the server's License directory. Please obtain a free
- Basic Helix Server license or purchase a commercial license
- from our website at http://www.real.com/. If you need
- further assistance, please visit our on-line support area
- at http://service.real.com/.
- License Key File: []: [ 这个是要许可证,可以先放下,等安装完再将许可证文件放入 ]
- Installation and use of Helix Server requires
- acceptance of the following terms and conditions:
- Press [Enter] to display the license text... [ 回车,然后....有兴趣就读一读吧^_^... ]
- Choose "Accept" to accept the terms of this
- license agreement and continue with Helix Server setup.
- If you do not accept these terms, enter "No"
- and installation of Helix Server will be cancelled.
- I accept the above license: [Accept]: [ 此处回车默认即可 ]
- Enter the complete path to the directory where you want
- Helix Server to be installed. You must specify the full
- pathname of the directory and have write privileges to
- the chosen directory.
- Directory: [/root/helixserver]: /usr/helixserver [ 更改安装路径 ]
- Please enter a username and password that you will use
- to access the web-based Helix Server Administrator and monitor.
- Username []: [ 设置远程管理用户名 ]
- Username []:Password []: [ 设置密码 ]
- Confirm Password []:
- Please enter a port on which Helix Server will listen for
- RTSP connections. These connections have URLs that begin
- with "rtsp://"
- Port [554]: [ 此处回车默认即可 ]
- Please enter a port on which Helix Server will listen for
- HTTP connections. These connections have URLs that begin
- with "http://"
- Port [80]:8080 [ 更改http传输端口,为避免和apache冲突,建议更改 ]
- Please enter a port on which Helix Server will listen for
- MMS connections. These connections have URLs that begin
- with "mms://"
- Port [1755]: [ 此处回车默认即可 ]
- Helix Server will listen for Administrator requests on the
- port shown. This port has been initialized to a random value
- for security. Please verify now that this pre-assigned port
- will not interfere with ports already in use on your system;
- you can change it if necessary.
- Port [11012]:11111 [ 更改远程管理访问的端口,系统默认的有时难以记住,可更改为好记的 ]
- You have selected the following Helix Server configuration:
- Admin User/Password: traveller2/****
- Encoder User/Password: traveller2/****
- Monitor Password: ****
- RTSP Port: 554
- HTTP Port: 8080
- MMS Port: 1755
- Admin Port: 11111
- Destination: /usr/helixserver
- Enter [F]inish to begin copying files, or [P]revious to go
- back to the previous prompts: [F]:
- [ 如果以上设置你没意见,此处回车默认即可,否则按P重新设置 ]
- Copying Helix Server files....
- Helix Server installation is complete.
- If at any time you should require technical
- assistance, please visit our on-line support area
- at http://service.real.com/.
- Cleaning up installation files...
- Done.
- [ 安装完成 ]
- [root@rhel helixserver]# ls
- crack HelixServerConfig.pdf
- HelixAdministrator helix-server-retail-11.01-rhel4-setup.bin
- HelixProxyAdmin.pdf HelixServerUnlimited11_Linux.zip
- HelixProxyConfig.pdf setup.tar.gz
- HelixServerAdmin.pdf
- [root@rhel helixserver]# cp -a HelixAdministrator/ /usr/helixserver/HelixAdministrator_zh/ [ 这是汉化过程,HelixAdministrator就是最初下载的汉化包解压得来 ]
- [root@rhel helixserver]# cp crack/DistributedLicensing.lic /usr/helixserver/License/ [ 破解过程??^_^ ]
- [root@rhel helixserver]#cd /usr/helixserver
- [root@rhel helixserver]# mv HelixAdministrator HelixAdministrator_en
- [ 为默认的英文语言包重命名,这样做的主要目的是,万一某一刻你突然感觉英文看着很爽,依然可以将管理界面换回英文 ]
- [root@rhel helixserver]# ln -s HelixAdministrator HelixAdministrator_zh/
- [root@rhel helixserver]# ls
- adm_b_db default.cfg HelixAdministrator_zh Plugins
- Bin default.cfg.old helixserver.my Plugins.old
- Bin.old enc_b_db Lib rmserver.cfg
- Cache enc_r_db Lib.old rmserver.cfg.old
- cdi_b_db enc_w_db License Secure
- Commerce HelixAdministrator Logs slta.cfg
- Content HelixAdministrator_en master.cfg
- [root@rhel helixserver]# /usr/helixserver/Bin/rmserver /usr/helixserver/rmserver.cfg & [ 启动服务器进程并让它在后台执行, 想让它开机自动启动请把这条命令加入/etc/rc.local]
- [root@rhel helixserver]# ps -aux |grep rmserver
- Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.3/FAQ
- root 2918 0.1 1.0 7000 2096 pts/0 S 18:17 0:00 ./Bin/rmserver rmserver.cfg
- root 2919 7.9 61.5 324136 117592 ? Ssl 18:17 0:02 ./Bin/rmserver rmserver.cfg
- root 2920 0.0 1.0 7004 2100 ? Ss 18:17 0:00 ./Bin/rmserver rmserver.cfg
- [ 检查服务是否已正常启动 ]
- 用netstat -tnl命令查看1755等端口是否已处于监听状态。
复制代码
这时你的流媒体服务器已经正常运行了,可以在远程进行维护.我是在另一台WINDOWS机上进行维护的.打开IE(或其他浏览器),输入 http://192.168.213.128:11111/admin/index.html
会提示让你输入用户名和密码,验证便可以看到管理界面,并且已经是全中文,如图
端口设置可在这里随意更改
限制最大用户数:
"加载点"里的内容一般是一定要更改的
现在我添加一个新的加载点mov1,注意加载点/mov1/最后一定要有这个"/",设置好后"应用"
更改加载点内容后若想生效必须重新启动helixserver服务,重启服务器按钮可在管理界面的右上角看到,重启后页面会在20秒后自动刷新,一般不需要等那么久,可以手动重载页面.
Helix Server Unlimited v11.0.1.1884已经将以前放在 "服务器设置中"的"媒体演示"功能也挪到,了右上角,和帮助等放在了一起,这样的更改的确更合理,你可以转到"媒体演示"页面进行服务器测试.这时你的流媒体服务器已基本能满足要求.
可监控服务器运行状态
helixserver还可以做许多设置,如访问控制,广播等,管理界面已经是中文,应当不难看懂,有些功能我自己也没有摸清楚,您可以到网上查到一些关于设置的文章,最好的教程是它的帮助文档.
http://haomovie.org/help/helix/ 这一篇也还好.
[ 本帖最后由 traveller2 于 2006-12-16 23:33 编辑 ] |
|