[求助]FC5无法进入图形界面

johnavon

内核2.6.16_2096,显卡ATi9600,安装了ati-driver-installer-8.24.8-x86.run和xorg-x11-drv-fglrx-devel-8.24.8-1.lvn5.i386.rpm后无法进入图形界面
一下是xorg.conf中的内容
# Xorg configuration created by system-config-display

Section "ServerLayout"
   Identifier"single head configuration"
   Screen 0 "Screen0" 0 0
   InputDevice "Mouse0" "CorePointer"
   InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
    FontPath "unix/:7100"
EndSection
Section "Module"
   Load "dbe"
   Load "extmod"
   Load "fbdevhw"
   Load "glx"
   Load "record"
   Load "freetype"
   Load "type1"
   Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
   Identifier "Keyboard0"
   Driver "kbd"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "us"
EndSection
Section "InputDevice"
   Identifier "Mouse0"
   Driver "mouse"
   Option "Protocol" "IMPS/2"
   Option "Device" "/dev/input/mice"
   Option "ZAxisMapping" "4 5"
   Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
   Identifier "Monitor0"
   VendorName "Monitor Vendor"
   ModelName "LXH-GJ796F"
   DisplaySize 320 240
   HorizSync 30.0 - 96.0
   VertRefresh 50.0 - 160.0
   Option "dpms"
EndSection
Section "Device"
   Identifier "Videocard0"
   Driver "fglrx"
   VendorName "Videocard vendor"
   BoardName "ATI Technologies Inc RV350 AP [Radeon 9600]"
EndSection
Section "Screen"
   Identifier "Screen0"
   Device "Videocard0"
   Monitor "Monitor0"
   DefaultDepth 24
   SubSection "Display"
      Viewport 0 0
      Depth 24
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection

[ 本帖最后由 johnavon 于 2006-5-4 16:36 编辑 ]

lunchan

看不出什麼來,有什麼報錯嗎?