- 论坛徽章:
- 0
|
各位大虾，请教一个问题：我开了vsftp服务，在本机上可以用新建的用户user1登陆，譬如该地址为192.168.2.2，我在shell下ftp 192.168.2.2可以成功，但在局域网其他机器上就不行，为什么啊？本人新手，望各位不吝赐教。以下是我的配置文件：
1 # Example config file /etc/vsftpd/vsftpd.conf
2 #
3 # The default compiled in settings are fairly paranoid. This sample file
4 # loosens things up a bit, to make the ftp daemon more usable.
5 # Please see vsftpd.conf.5 for all compiled in defaults.
6 #
7 # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
8 # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
9 # capabilities.
10 #
11 # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
12 #anonymous_enable=YES
13 anonymous_enable=NO
14
15 listen_port=21
16 #
17 # Uncomment this to allow local users to log in.
18 local_enable=YES
19 #
20 # Uncomment this to enable any form of FTP write command.
21 write_enable=YES
22 #
23 # Default umask for local users is 077. You may wish to change this to 022,
24 # if your users expect that (022 is used by most other ftpd's)
25 local_umask=022
26 #
27 # Uncomment this to allow the anonymous FTP user to upload files. This only
28 # has an effect if the above global write enable is activated. Also, you will
29 # obviously need to create a directory writable by the FTP user.
30 #anon_upload_enable=YES
31 #
32 # Uncomment this if you want the anonymous FTP user to be able to create
33 # new directories.
34 #anon_mkdir_write_enable=YES
35 #
36 # Activate directory messages - messages given to remote users when they
37 # go into a certain directory.
38 dirmessage_enable=YES
39 #
40 # Activate logging of uploads/downloads.
41 xferlog_enable=YES
42 #
43 # Make sure PORT transfer connections originate from port 20 (ftp-data).
44 connect_from_port_20=YES
45 #
46 # If you want, you can arrange for uploaded anonymous files to be owned by
47 # a different user. Note! Using "root" for uploaded files is not
48 # recommended!
49 #chown_uploads=YES
50 #chown_username=whoever
51 #
52 # You may override where the log file goes if you like. The default is shown
53 # below.
54 #xferlog_file=/var/log/vsftpd.log
55 #
56 # If you want, you can have your log file in standard ftpd xferlog format
57 xferlog_std_format=YES
58 #
59 # You may change the default value for timing out an idle session.
60 #idle_session_timeout=600
61 #
62 # You may change the default value for timing out a data connection.
63 #data_connection_timeout=120
64 #
65 # It is recommended that you define on your system a unique user which the
66 # ftp server can use as a totally isolated and unprivileged user.
67 #nopriv_user=ftpsecure
68 #
69 # Enable this and the server will recognise asynchronous ABOR requests. Not
70 # recommended for security (the code is non-trivial). Not enabling it,
71 # however, may confuse older FTP clients.
72 #async_abor_enable=YES
73 #
74 # By default the server will pretend to allow ASCII mode but in fact ignore
75 # the request. Turn on the below options to have the server actually do ASCII
76 # mangling on files when in ASCII mode.
77 # Beware that turning on ascii_download_enable enables malicious remote parties
78 # to consume your I/O resources, by issuing the command "SIZE /big/file" in
79 # ASCII mode.
80 # These ASCII options are split into upload and download because you may wish
81 # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
82 # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
83 # on the client anyway..
84 #ascii_upload_enable=YES
85 #ascii_download_enable=YES
86 #
87 # You may fully customise the login banner string:
88 #ftpd_banner=Welcome to blah FTP service.
89 #
90 # You may specify a file of disallowed anonymous e-mail addresses. Apparently
91 # useful for combatting certain DoS attacks.
92 #deny_email_enable=YES
93 # (default follows)
94 #banned_email_file=/etc/vsftpd.banned_emails
95 #
96 # You may specify an explicit list of local users to chroot() to their home
97 # directory. If chroot_local_user is YES, then this list becomes a list of
98 # users to NOT chroot().
99 #chroot_list_enable=YES
100 # (default follows)
101 #chroot_list_file=/etc/vsftpd.chroot_list
102 #
103 # You may activate the "-R" option to the builtin ls. This is disabled by
104 # default to avoid remote users being able to cause excessive I/O on large
105 # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
106 # the presence of the "-R" option, so there is a strong case for enabling it.
107 #ls_recurse_enable=YES
108 #userlist_deny=NO
109 pam_service_name=vsftpd
110 #userlist_enable=YES
111 userlist_enable=NO
112 #enable for standalone mode
113 listen=YES
114 tcp_wrappers=YES |
|
免费注册
发表于 2006-03-28 12:43
