想使用Darwin的朋友看看

yansw

440BX主板值得一试.其他人就算了!

Darwin 7.0.1 should install and boot on all PowerPC-based Macintosh
computers supported by Mac OS X 10.3.

Additionally, Darwin 7.0.1 supports many x86-based personal computers:

IDE:
        Only the PIIX4 IDE controllers have been found to work.
        Attached devices must be UDMA/33 compatible or better.
Ethernet:
        Intel 8255x 10/100 ethernet controllers are supported.
           3Com 905cXXX based ethernet controllers are supported.
Video:
        You must have a VESA 2.0 compliant video card.  Almost all
        modern graphics cards are VESA 2.0 compliant.  However,
        emulators such as vmware do not have VESA 2.0 compliant
        emulated video cards.
Successfully tested hardware:
        All 440BX motherboards tested have worked with their
        internal IDE controllers.  
        IBM ThinkPad A21m (with onboard Intel ethernet)

See <http://www.opendarwin.org/hardware/>; for a community-created
site that lists hardware that has been found to work.