change cpu to amd 2200+

emperor

today, i change my notebook's cpu from 1800+ to 2200+,find speed is up to original
see my spec:
Page 5 / 29
CPU
-Mobile-AMD Athlon™ XP 35W 1700+/1800+/1900+/2000+/2200+ with OPGA Package
-Mobile-AMD Barton 35W 2400+/2500+ with OPGA Package
-FSB 266MHz
-(P) PowerNow! support
System Memory
-256MB DDR SDRAM on board
-One 200-pin DDR socket for memory expansion
-Expandable with combination of optional 128MB/256MB/512MB/1024MB memory
-Support PC2100/PC1600 DDR266 SDRAM
L2 cache
-On die 64KB/256KB L2 cache depended on CPU installation.
Chip set
-North Bridge: VIA VT8372 (KN266) “Twister-K DDR” with ProSavage8 AGP Gfx integrated.
-South Bridge: VIA VT8235
BIOS ROM
-512KB Flash EEPROM (LPC interface)
-Please check the Vendor and Model list in Appendix C
KB Controller
-HITACHI H8 (LPC interface)
Keyboard
-Tetra like Window Keyboard (JP) for 14.1
-Keytop design : New Artwork with new Windows Key Logo
Pointing Device
-Synaptics: TM41PD350
FDD
-USB I/F; 3.5” Format for 720KB/1.2MB/1.44MB
HDD
-40GB HDD (2.5”9.5mm height)
-Support Ultra DMA up to 100
-Support PIO mode
CD-ROM/CD-RW/DVD/COMBO
-Support CD-ROM, CD-RW, DVD and Combo Drive
LCD
-14.1” XGA TFT color-LCD (No support DSTN LCD panel)
-Resolution: 1024x768[XGA]
VGA
-Integrated Savage8 AGP Graphics Core
-Supports LCD/CRT simultaneous display mode
-AGP 4X(133MHz) I/F
-Macrovision support
Video Memory
-16/32 MB (shared system memory / UMA, BIOS optional)
PCMCIA
-EnE Technology CB1410
-Type I or Type II x 1
MiTAC Technology Corporation
Confidential
Do Not Disseminate
-ExCA compatible
-No Support ZV port
-Cardbus support
IEEE1394
-Reserved
Audio
-PCI Sound
-AC97 CODEC: RealTek ALC201
-Full duplex support
-3D sound
-stereo speakers
-Without SPDIF support.
-Without AV Control buttons (without music-CD play on Windows OFF)
MODEM
-SmartLink
-56Kbps (V.90 Win Modem), MDC Interface
LAN
-Integrated in VT8235+VT6103 (PHY)
-Support both 10BASE-T and 100BASE-TX
AC Adapter
-Universal AC adaptor
-Input: 100-240V, 50/60Hz AC
Battery
-Li-ION
Port
-Without Parallel Port Support
-USB 2.0 (Backward compatible with USB1.1) x4
-Without IEEE1394a (4 pins) Support
-RJ-11 port x1
-RJ-45 port x1
-Microphone in x1
-VGA monitor out
-Without TV-out (S-Video) Support
-Without Serial port Support
-Without PS/2 port Support
-DC input
Brightness
-There are 16 levels for TFT LCD panel
(By pressing Hot-Key. Please check the brightness level in Appendix B)
Audio Volume Control
-No AV Control buttons (No music-CD play at Windows OFF)
-Sound Volume control by Analog Regulator


本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u/4904/showart_15669.html