设置网卡工作模式的问题

laughsky

rh7.3，从dmesg看出网卡是SMC1211TX EZCard 10/100 (RealTek RTL8139)，10/100m自适应的

能够正常识别并使用，但是使用mii-tool察看网卡状态时，显示

eth1: 10 Mbit, half duplex, no link
product info: vendor 00:00:00, model 0 rev 0
basic mode: 10 Mbit, half duplex
basic status: no link
capabilities:
advertising:

eth0为另一块网卡，被禁用

我想把eth1设置为100baseTx-FD，但是使用-A和-F参数都无法改变网卡状态

设置时的消息为

TLAN: eth0: Starting autonegotiation.
TLAN: Giving autonegotiation more time.
TLAN: Please check that your adapter has
TLAN: been properly connected to a HUB or Switch.
TLAN: Trying to establish link in the background...
eth1: Setting 100mbps full-duplex based on auto-negotiated partner
ability 45e1.

请大家指教

怎样才能设置为100baseTx-FD模式

jiangzx

miitool -F ethn应该可以搞定以，不过交换机那边也要支持哦