845G的集成显卡

cnnetinfo

建议你用 redhat  8。0  ，然后再去 intel 官方网站  down  最新的 845
video driver 。

cnnetinfo

注意：
    最新驱动是
Intel(R) Extreme Graphics - Linux*
[i830-20030120-i386-Linux.tar.gz] (874KB)

弱智

谢谢，让我试试看。

弱智

找不到。

sakulagi

http://downloadfinder.intel.com/ ... C&amp

弱智

[quote]原帖由 "sakulagi"][/quote 发表：


thx!!!
I searched it on RedHat site, but I failed.
I've forget the Intel's site~~~

sakulagi,
Thanks a lot!

sakulagi

I've installed this driver and got my rh8 gnome run on i845g.
It's easy to use.

sakulagi

这个是intel关于linux显卡驱动的主页：
http://www.intel.com/support/graphics/linux/graphics.htm

sakulagi

http://www.intel.com/support/graphics/linux/graphics.htm
Intel显卡linux驱动的主页

lnx3000

Install intel 845g/845gl video driver for Linux

1.        
   
2. 1. Install Linux
   
3. 
   
4. 2. Log in as root or as a superuser
   
5. 
   
6. 3. Install kernel headers
   
7. 
   
8. a. For Red Hat 7.3, this is on CD2:
   
9. /RedHat/RPMS/kernel-source-2.4.18-3.i386.rpm
   
10.         (For Red Hat 8.0, this is on CD2:
    
11. /RedHat/RPMS/kernel-source-2.4.18-14.i386.rpm)
    
12. 
    
13. b. Alternately, load your kernel config file,
    
14. save the config, and run “make dep”
    
15. 
    
16. 4. Extract the downloaded files:
    
17. 
    
18. a. tar –zxvf 20030106-i386-Linux.tar.gz
    
19. 
    
20. 5. Ensure X Windows is not running
    
21. 
    
22. 6. cd dripkg
    
23. 
    
24. 7. ./install.sh
    
25. 
    
26. 8. Follow the prompts; most users should be able to press
    
27. “Enter” at each prompt
    
28. 
    
29. 9. Make a backup copy of your XF86Config-4 file
    
30. 
    
31. 10. Modify the XF86Config-4 file by _ONE_ of three methods: (I use redhat-config-xfree86 to configure the X Server)
    
32. 
    
33. a. Use a text editor to modify section “Device” –
    
34. modify “Driver” entry to read “i810”
    
35. 
    
36. b. _OR_ run ‘Xconfigurator,’ selecting “Intel 830”
    
37. from the list
    
38. 
    
39. c. _OR_ run ‘X –configure’ the edit ~/XF86Config.new
    
40. 
    
41. i. Immediately after the “Monitor” line in
    
42. the "Screen" section, add
    
43. ‘DefaultDepth 16’
    
44. 
    
45. ii. At the end of the file (if not already
    
46. there), add:
    
47. 
    
48. Section "DRI"
    
49. Mode 0666
    
50. EndSection
    
51. 
    
52. iii.Make the new config file the default by
    
53. copying it to XF86Config-4:
    
54. 1. cp ~/XF86Config.new
    
55. /etc/X11/XF86Config-4
    
56. 
    
57. 11. Log out of root or superuser
    
58. 
    
59. 12. startx
    
60. 
    
61. 详见：
    
62. ftp://aiedownload.intel.com/df-support/5117/ENG/readme.txt
    

复制代码