这个问题怎么解决？

沈默。。。

# pvcreate -f /dev/rdsk/c2t0d0
# mkdir /dev/vg06
# mknod /dev/vg06/group c 64 0x040000
# vgcreate vg06 /dev/dsk/c2t0d0
vgcreate: Couldn't open physical volume "/dev/dsk/c2t0d0":
Device busy
#

hetg407

dd看看盘是否有问题？

InfoSVC

检查一下syslog看看是否有更多的提示信息

沈默。。。

回复 2# hetg407


       # dd if=/dev/dsk/c2t0d0 of=/dev/dsk/c2t0d0 count=5 bs=100k
5+0 records in
5+0 records out

沈默。。。

回复 3# InfoSVC


    # cat syslog.log
Mar 30 14:43:41 rx2600 syslogd: restart
Mar 30 14:43:41 rx2600 vmunix: Found adjacent data tr.  Growing size.  0x34cb000 -> 0x74cb000.
Mar 30 14:43:41 rx2600 vmunix: Pinned PDK malloc pool: base: 0xe000000100b35000  size=119596K
Mar 30 14:43:41 rx2600 vmunix: Loaded ACPI revision 2.0 tables.
Mar 30 14:43:41 rx2600 vmunix:
Mar 30 14:43:41 rx2600 vmunix: MFS is defined: base= 0xe000000100b35000  size= 4984 KB
Mar 30 14:43:41 rx2600 vmunix: Unpinned PDK malloc pool: base: 0xe000000108000000  size=81920K
Mar 30 14:43:41 rx2600 vmunix: NOTICE: cachefs_link(): File system was registered at index 4.
Mar 30 14:43:41 rx2600 vmunix: NOTICE: nfs3_link(): File system was registered at index 7.
Mar 30 14:43:41 rx2600 vmunix:
Mar 30 14:43:41 rx2600  above message repeats 2 times
Mar 30 14:43:41 rx2600 vmunix: 0 sba
Mar 30 14:43:41 rx2600 vmunix: 0/0 lba
Mar 30 14:43:41 rx2600 vmunix: 0/0/1/0 UsbOhci
Mar 30 14:43:41 rx2600 vmunix: 0/0/1/1 UsbOhci
Mar 30 14:43:41 rx2600 vmunix: 0/0/1/2 UsbEhci
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0 side_multi
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.0 side
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.0.7 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.0.7.0 sctl
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.1 side
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.1.7 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/0/2/0.1.7.0 sctl
Mar 30 14:43:41 rx2600 vmunix: 0/0/3/0 intl100
Mar 30 14:43:41 rx2600 vmunix: 0/1 lba
Mar 30 14:43:41 rx2600 vmunix: Initializing the Ultra320 SCSI Controller at 0/1/1/0. Controller firmware version is 01.03.35.00
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/0 mpt
Mar 30 14:43:41 rx2600 vmunix: SCSI Ultra320 0/1/1/0 instance 2:       The driver is now online
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/0.1 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/0.1.0 sdisk
Mar 30 14:43:41 rx2600 vmunix: Initializing the Ultra320 SCSI Controller at 0/1/1/1. Controller firmware version is 01.03.35.00
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/1 mpt
Mar 30 14:43:41 rx2600 vmunix: 0/1/2/0 igelan
Mar 30 14:43:41 rx2600 vmunix: 0/2 lba
Mar 30 14:43:41 rx2600 vmunix: 0/2/1/0 td
Mar 30 14:43:41 rx2600 vmunix: SCSI Ultra320 0/1/1/1 instance 3:       The driver is now online
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/0.7 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/0.7.0 sctl
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/1.2 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/1.2.0 sdisk
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/1.7 tgt
Mar 30 14:43:41 rx2600 vmunix: 0/1/1/1.7.0 sctl
Mar 30 14:43:41 rx2600 vmunix: td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
Mar 30 14:43:41 rx2600 vmunix: 0/3 lba
Mar 30 14:43:41 rx2600 vmunix: 0/4 lba
Mar 30 14:43:41 rx2600 vmunix: 0/4/1/0 igelan
Mar 30 14:43:41 rx2600 vmunix: 0/5 lba
Mar 30 14:43:41 rx2600 vmunix: 0/6 lba
Mar 30 14:43:41 rx2600 vmunix: 0/6/1/0 asio0
Mar 30 14:43:41 rx2600 vmunix: 0/6/1/1 asio0
Mar 30 14:43:41 rx2600 vmunix: 0/6/2/0 gvid_core
Mar 30 14:43:41 rx2600 vmunix: 120 processor
Mar 30 14:43:41 rx2600 vmunix: 121 processor
Mar 30 14:43:41 rx2600 vmunix: 250 pdh
Mar 30 14:43:41 rx2600 vmunix: 250/0 ipmi
Mar 30 14:43:41 rx2600 vmunix: 250/1 asio0
Mar 30 14:43:41 rx2600 vmunix: 250/2 asio0
Mar 30 14:43:41 rx2600 vmunix: 250/3 acpi_node
Mar 30 14:43:41 rx2600 vmunix: Boot device's HP-UX HW path is: 0/1/1/0.1.0
Mar 30 14:43:41 rx2600 vmunix: igelan1: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
Mar 30 14:43:41 rx2600 vmunix: igelan2: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/4/1/0
Mar 30 14:43:41 rx2600 vmunix:
Mar 30 14:43:41 rx2600 vmunix:     System Console is on the Built-In Serial Interface
Mar 30 14:43:41 rx2600 vmunix: Logical volume 64, 0x3 configured as ROOT
Mar 30 14:43:41 rx2600 vmunix: Logical volume 64, 0x2 configured as SWAP
Mar 30 14:43:41 rx2600 vmunix: Logical volume 64, 0x2 configured as DUMP
Mar 30 14:43:41 rx2600 vmunix:     Swap device table:  (start & size given in 512-byte blocks)
Mar 30 14:43:41 rx2600 vmunix:         entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Mar 30 14:43:41 rx2600 vmunix:     Dump device table:  (start & size given in 1-Kbyte blocks)
Mar 30 14:43:41 rx2600 vmunix:         entry 0000000000000000 - major is 31, minor is 0x21000; start = 826228, size = 4194300
Mar 30 14:43:41 rx2600 vmunix: Starting the STREAMS daemons-phase 1
Mar 30 14:43:41 rx2600 vmunix: Create STCP device files
Mar 30 14:43:41 rx2600 vmunix: Starting the STREAMS daemons-phase 2
Mar 30 14:43:41 rx2600 vmunix:      $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Mar 30 14:43:41 rx2600 vmunix: Memory Information:
Mar 30 14:43:41 rx2600 vmunix:     physical page size = 4096 bytes, logical page size = 4096 bytes
Mar 30 14:43:41 rx2600 vmunix:     Physical: 2085608 Kbytes, lockable: 1313792 Kbytes, available: 1536860 Kbytes
Mar 30 14:43:41 rx2600 vmunix:
Mar 30 14:43:41 rx2600 nettl[647]: nettl starting up.
Mar 30 14:43:54 rx2600 sshd[794]: Server listening on :: port 22.
Mar 30 14:43:54 rx2600 sshd[794]: Server listening on 0.0.0.0 port 22.
Mar 30 14:43:54 rx2600 rpcbind: check_netconfig: Found CLTS loopback transport
Mar 30 14:43:54 rx2600 rpcbind: check_netconfig: Found COTS loopback transport
Mar 30 14:43:54 rx2600 rpcbind: check_netconfig: Found COTS ORD loopback transport
Mar 30 14:43:54 rx2600 rpcbind: init_transport: check binding for udp
Mar 30 14:43:54 rx2600 rpcbind: init_transport: check binding for tcp
Mar 30 14:43:54 rx2600 rpcbind: init_transport: check binding for ticlts
Mar 30 14:43:54 rx2600 rpcbind: init_transport: check binding for ticotsord
Mar 30 14:43:54 rx2600 rpcbind: init_transport: check binding for ticots
Mar 30 14:43:54 rx2600 inetd[839]: Reading configuration
Mar 30 14:43:54 rx2600 inetd[839]: ftp/tcp: Added service, server /usr/lbin/ftpd
Mar 30 14:43:54 rx2600 inetd[839]: telnet/tcp: Added service, server /usr/lbin/telnetd
Mar 30 14:43:54 rx2600 inetd[839]: login/tcp: Added service, server /usr/lbin/rlogind
Mar 30 14:43:54 rx2600 inetd[839]: shell/tcp: Added service, server /usr/lbin/remshd
Mar 30 14:43:54 rx2600 inetd[839]: exec/tcp: Added service, server /usr/lbin/rexecd
Mar 30 14:43:54 rx2600 inetd[839]: ntalk/udp: Added service, server /usr/lbin/ntalkd
Mar 30 14:43:54 rx2600 inetd[839]: auth/tcp: Added service, server /usr/lbin/identd
Mar 30 14:43:54 rx2600 inetd[839]: printer/tcp: Added service, server /usr/sbin/rlpdaemon
Mar 30 14:43:54 rx2600 inetd[839]: daytime/tcp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: daytime/udp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: time/tcp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: echo/tcp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: echo/udp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: discard/tcp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: discard/udp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: chargen/tcp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: chargen/udp: Added service, server internal
Mar 30 14:43:54 rx2600 inetd[839]: kshell/tcp: Added service, server /usr/lbin/remshd
Mar 30 14:43:54 rx2600 inetd[839]: klogin/tcp: Added service, server /usr/lbin/rlogind
Mar 30 14:43:54 rx2600 inetd[839]: dtspc/tcp: Added service, server /usr/dt/bin/dtspcd
Mar 30 14:43:54 rx2600 inetd[839]: swat/tcp: Added service, server /opt/samba/bin/swat
Mar 30 14:43:54 rx2600 inetd[839]: hacl-probe/tcp: Added service, server /opt/cmom/lbin/cmomd
Mar 30 14:43:54 rx2600 inetd[839]: registrar/tcp: Added service, server /etc/opt/resmon/lbin/registrar
Mar 30 14:43:54 rx2600 inetd[839]: hacl-cfg/udp: Added service, server /usr/lbin/cmclconfd
Mar 30 14:43:54 rx2600 inetd[839]: hacl-cfg/tcp: Added service, server /usr/lbin/cmclconfd
Mar 30 14:43:54 rx2600 inetd[839]: recserv/tcp: Added service, server /usr/lbin/recserv
Mar 30 14:43:54 rx2600 inetd[839]: rpc.cmsd/udp: Added service, server /usr/dt/bin/rpc.cmsd
Mar 30 14:43:54 rx2600 inetd[839]: rpc.ttdbserver/tcp: Added service, server /usr/dt/bin/rpc.ttdbserver
Mar 30 14:43:54 rx2600 inetd[839]: Configuration complete
Mar 30 14:44:02 rx2600 cmclconfd[1247]: Unable to stat /etc/cmcluster/cmclconfig, No such file or directory
Mar 30 14:44:06 rx2600 cimserver[1270]: Listening on HTTPS port 5989.
Mar 30 14:44:06 rx2600 cimserver[1270]: Listening on local connection socket.
Mar 30 14:44:06 rx2600 cimserver[1270]: Started HP-UX WBEM Services version A.02.00.07.
Mar 30 14:44:02 rx2600 cmclconfd[1247]: Unable to stat /etc/cmcluster/cmclconfig, No such file or directory
Mar 30 14:44:18 rx2600 pwgrd: Started at Wed Mar 30 14:44:18 2011, pid = 1399
Mar 30 14:44:19 rx2600 diagmond[1434]: started
Mar 30 14:44:19 rx2600 /usr/sbin/envd[1438]: restart, and read the configuration file
Mar 30 01:44:47 rx2600 sfd[1958]: daemon already running.
Mar 30 01:44:47 rx2600 sfd[1965]: starting the daemon.
Mar 30 01:44:47 rx2600 krsd[1957]: Delay time is 300 seconds

hetg407

回复  hetg407


      # dd if=/dev/dsk/c2t0d0 of=/dev/dsk/c3t2d0 count=1 bs=100k
     
        ...
沈默。。。 发表于 2011-03-30 15:02

    设备文件名怎么不一样？

InfoSVC

dd的命令写错了

InfoSVC

把ioscan -fnCdisk
strings /etc/lvmtab
的结果贴出来

easybegin

不会是已经在用了吧

沈默。。。

回复 8# InfoSVC


    # ioscan -funC disk
Class     I  H/W Path     Driver S/W State   H/W Type     Description
=====================================================================
disk     10  0/1/1/0.0.0  sdisk CLAIMED     DEVICE       COMPAQ  BD03685A24
                         /dev/dsk/c2t0d0     /dev/rdsk/c2t0d0  
                         /dev/dsk/c2t0d0s1   /dev/rdsk/c2t0d0s1
disk      0  0/1/1/0.1.0  sdisk CLAIMED     DEVICE       HP 36.4GMAS3367NC
                         /dev/dsk/c2t1d0     /dev/dsk/c2t1d0s3   /dev/rdsk/c2t1d0s2
                         /dev/dsk/c2t1d0s1   /dev/rdsk/c2t1d0    /dev/rdsk/c2t1d0s3
                         /dev/dsk/c2t1d0s2   /dev/rdsk/c2t1d0s1