求助：solaris8 不能启动的问题！

laj1978

突然断电重启后，出现以下问题，请各位大虾帮帮忙，看怎么解决，谢谢！
Rebooting with command:
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0 File and args:
SunOS Release 5.8 Version Generic_108528_29 64-bit.
Copyright 1983-2003 Sun Microsystems.Inc. All rights reserved.
/kernel/strmod/sparcv9/rpcmod:undefined symbol 'mi_timer_free'
/kernel/strmod/sparcv9/rpcmod:undefined symbol 'mi_timer_alloc'
/kernel/strmod/sparcv9/rpcmod:undefined symbol 'mi_timer'
/kernel/strmod/sparcv9/rpcmod:undefined symbol 'mi_timer_valid'
/kernel/strmod/sparcv9/rpcmod:undefined symbol 't_tlitosyserr'
WARNING:mod_load:cannot load module 'rpcmod'
WARNING:Cannot load drv/options
Can't load the root filesystem.
Type 'go' to resume
{0}ok
按go后重启仍是这种情况。

非凡公子

root文件系统有问题了,用cdrom启动到单用户下,fsck一下root系统试试吧..

dfck001

LZ有没有做镜像?

dfck001

Have you just recently patched the machine?

The most common cause of this problem is that you've patched a machine
whilst Disksuite had a disk in maintance mode.  As devices in maintenance
mode will not get written to, this means that one side of your / mirror
will get patched, whilst the other won't. When you come to reboot if
you boot off the un-patched side then things will break badly in much
the same way as you've seen.

The fix is simply to boot off the other side of the mirror. eg, in the
above you're booting off /pci at 1f,4000/scsi at 3/disk at 0,0 which looks like
disk0 on an E220/420, so presuming your mirror disk is the other internal
just try using "boot disk1" to fix the problem.

Once you've done that, fix whatever is broken in disksuite, and then
implement some form of monitoring so that you detect failed disks in
disksuite sooner!

  
网上找到的，希望对LZ有用

microvc

我也是同样碰到这种问题，fsck后解决不了，最后重装了。
不知道有什么更好的办法吗？