superdome备份

txtom

make_tape_recovery -p后
ctaissd1#[/]make_tape_recovery -p
       * Creating local directories for configuration files and archive.

=======  05/24/11 15:31:41 EAT  Started make_tape_recovery. (Tue May 24
         15:31:41 EAT 2011)
         @(#) Ignite-UX Revision C.6.3.324
         @(#) net_recovery (opt) $Revision: 10.704 $

NOTE:    A previous make_sys_image process appears to be running.
         Please wait for its completion or remove lockfile(s):
         /var/tmp/ign_configure/make_sys_image_flag897
NOTE:    A previous make_sys_image process has not completed.
NOTE:    A previous make_sys_image process has not completed.
NOTE:    A previous make_sys_image process has not completed.
       * Checking Versions of Ignite-UX filesets

NOTE:    A previous make_sys_image process appears to be running.
         Please wait for its completion or remove lockfile(s):
         /var/tmp/ign_configure/make_sys_image_flag897


WARNING: The make_sys_image failed to save the LIF volume.

       * Creating System Configuration.
WARNING: The volume group /dev/vg00 will be only partially included in the
         System Recovery Archive.  This means that not all files and
         directories on this volume group will be restored when the archive is
         installed.  This message can be suppressed using the "-P s" option for
         make_tape_recovery. See make_tape_recovery(1M) for more details.
         
       * /opt/ignite/bin/save_config -f
         /var/opt/ignite/recovery/2011-05-24,15:31/system_cfg vg00
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Backing Up Volume Group /dev/vg_lock
       * /usr/sbin/vgcfgbackup /dev/vg_lock
       * Creating Map Files for Volume Group /dev/vg_lock
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg_lock.mapfile /dev/vg_lock

       * Backing Up Volume Group /dev/vg_ctais
       * /usr/sbin/vgcfgbackup /dev/vg_ctais
       * Creating Map Files for Volume Group /dev/vg_ctais
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg_ctais.mapfile
         /dev/vg_ctais

       * Backing Up Volume Group /dev/vg_dumps
       * /usr/sbin/vgcfgbackup /dev/vg_dumps
       * Creating Map Files for Volume Group /dev/vg_dumps
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg_dumps.mapfile
         /dev/vg_dumps

       * Backing Up Volume Group /dev/vg_ctais1
       * /usr/sbin/vgcfgbackup /dev/vg_ctais1
       * Creating Map Files for Volume Group /dev/vg_ctais1
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg_ctais1.mapfile
         /dev/vg_ctais1

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration

       * /opt/ignite/lbin/make_arch_config -c
         /var/opt/ignite/recovery/2011-05-24,15:31/archive_cfg -g
         /var/opt/ignite/recovery/2011-05-24,15:31/flist -n 2011-05-24,15:31 -r
         pa -b 64 -d Recovery\ Archive -t 1 -i 1 -m t
       * Saving the information about archive to
         /var/opt/ignite/recovery/previews
       *
         
       * **** This is just Preview Only.                        ****
       * **** No archive has been created yet.                  ****
       * **** You may modify the configure files                ****
       * **** and use -r option for resuming to create archive. ****
         

=======  05/24/11 15:33:41 EAT  make_tape_recovery completed with warnings
ctaissd1#[/]

power2k08

make_tape_recovery -Av