请教：Solairs8 init s以后显示器不输出了

bioleon

-o-
偶苦啊
贴一下输出的dd
when i run "init s", my box reboot and monitor cann't display anything. i use console connect, can see something but can't input any char.

normal boot have keyboard，console output：

Sun Fire 480R, Keyboard Present
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.10.8, 8192 MB memory installed, Serial #54832996.
Ethernet address 0:3:ba:44:af:64, Host ID: 8344af64.





Boot device: disk  File and args:
SunOS Release 5.8 Version Generic_108528-17 64-bit
Copyright 1983-2001 Sun Microsystems, Inc.  All rights reserved.
configuring IPv4 interfaces: ce0ifconfig: setifflags: SIOCSLIFFLAGS: hme0: Canno
t assign requested address
hme0.
Hostname: sunadmin
The / file system (/dev/rdsk/c1t0d0s0) is being checked.
/dev/rdsk/c1t0d0s0: UNREF DIR  I=1203205  OWNER=bin MODE=40775
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=1203205 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=1191171  OWNER=bin MODE=40775
/dev/rdsk/c1t0d0s0: SIZE=7168 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=1191171 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=1167105  OWNER=bin MODE=40555
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:02 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=1167105 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=1040773  OWNER=root MODE=40755
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan  9 16:28 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=1040773 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=727950  OWNER=bin MODE=40777
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:20 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=727950 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=673794  OWNER=bin MODE=40555
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=673794 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=529411  OWNER=root MODE=40755
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=529411 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=427139  OWNER=root MODE=40755
/dev/rdsk/c1t0d0s0: SIZE=1024 MTIME=Jan 12 10:17 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=427139 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=348930  OWNER=root MODE=40755
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:17 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=348930 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=342914  OWNER=bin MODE=40555
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:20 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=342914 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=18050  OWNER=bin MODE=40555
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=18050 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s0: UNREF DIR  I=12034  OWNER=bin MODE=40555
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=12034 CONNECTED. PARENT WAS I=1094918
/dev/rdsk/c1t0d0s0: UNREF DIR  I=10  OWNER=bin MODE=40775
/dev/rdsk/c1t0d0s0: SIZE=512 MTIME=Jan 12 10:19 2004  (RECONNECTED)
/dev/rdsk/c1t0d0s0: DIR I=10 CONNECTED. PARENT WAS I=1203205
/dev/rdsk/c1t0d0s0: LINK COUNT lost+found I=3  OWNER=root MODE=40700
/dev/rdsk/c1t0d0s0: SIZE=8192 MTIME=Jan  8 17:15 2004  COUNT 15 SHOULD BE 26
/dev/rdsk/c1t0d0s0: LINK COUNT INCREASING
/dev/rdsk/c1t0d0s0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c1t0d0s0). Exit the shell when
done to continue the boot process.


Type control-d to proceed with normal startup,
(or give root password for system maintenance):

bioleon

debug boot：
<*>;
Hardware Power On

@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 CPU2*
Validating JTAG integrity...Done
Disabling DAR error circuitry...Done
Clearing DCS error circuitry state...Done
Initializing DTL circuitry state...Done
Initializing CDX via JTAG...Done
Enabling DAR error circuitry...Done

Probing Centerplane....part# 501-5819-13 serial# 043792
  Safari min 100MHz, cumulative 100MHz;  max 150MHz, cumulative 150MHz
  'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Riser......part# 501-5820-04 serial# 040984
Probing System RSC.....part# 501-5856-06 serial# 191696
Probing PwrDistBoard...part# 375-3006-05 serial# M47538
Probing PowerSupply0...part# 300-1480-05 serial# N94237
Probing PowerSupply1...part# 300-1480-05 serial# N93944
Probing FCAL BPlane0...part# 501-5822-04 serial# 043230
Probing GPTwo Slot A...part# 501-6334-04 serial# 111237
  Safari min 100MHz, cumulative 100MHz;  max 150MHz, cumulative 150MHz
  CPU rated speed 900MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...No module detected

Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
         Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400
... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
         Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400 Done
Setting system speed (and resetting)...
<*>;
Set Speed Reset

@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.2042

0>;@(#) Cherrystone POST 4.10.8 2003/07/24 18:07
       /export/common-source/firmware_re/post/post-build-4.10.8/Camelot/cstone/i
ntegrated  (firmware_re)
0>;Jump from OBP->OST.
0>;CPUs present in system: 0 2
0>;Keyswitch in DIAGNOSTIC POSITION.
0>;Diag level set to MIN.
0>;MFG scrpt mode set NORM
0>;I/O port set to serial TTYA.
0>;
0>;Start selftest...
0>;Init CPU
0>;      Cheetah_plus Version 2.3
0>;DMMU Registers Access
0>;DMMU TLB DATA RAM Access
0>;DMMU TLB TAGS Access
0>;IMMU Registers Access
0>;IMMU TLB DATA RAM Access
0>;IMMU TLB TAGS Access
0>robe Ecache
0>;      Size = 00000000.00800000...
0>;Ecache Data Bitwalk
0>;Ecache Address Bitwalk
0>;Scrub and Setup Ecache
0>;Setup and Enable DMMU
0>;Setup DMMU Miss Handler
0>;Test and Init Temp Mailbox
2>;Init CPU
2>;      Cheetah_plus Version 2.3
2>;DMMU Registers Access
2>;DMMU TLB DATA RAM Access
2>;DMMU TLB TAGS Access
2>;IMMU Registers Access
2>;IMMU TLB DATA RAM Access
2>;IMMU TLB TAGS Access
2>robe Ecache
2>;      Size = 00000000.00800000...
2>;Ecache Data Bitwalk
2>;Ecache Address Bitwalk
2>;Scrub and Setup Ecache
2>;Setup and Enable DMMU
2>;Setup DMMU Miss Handler
2>;Test and Init Temp Mailbox
0>;Initializing Scan Database
0>;Mask DAR errors off
0>;Init CDX DTL
0>;Init DAR DTL
0>;Enable Partial DAR error
0>;Init DCS DTL
0>;Init I2C
0>;Unquiesce Safari
0>;Margin all voltages to nominal
0>;Scan ring integrity
0>;INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs) Scan Ri
ng NOT Present or Shut OFF
0>;INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring NOT Prese
nt or Shut OFF
0>;Set Trip Temp CPU 0 to 110C
0>;Set Trip Temp CPU 2 to 110C
0>;MON JAN  12 6:39:34 GMT 4
0>;Safari quick check
0>;       to IO-bridge_0
0>;       to IO-bridge_1
0>;Safari full  check
0>;       to IO-bridge_0
0>;       to IO-bridge_1
0>;Disable Cheetah 0 error checking
0>;Disable Cheetah 2 error checking
0>robe and Setup Memory
0>;INFO:   2048MB Bank 0
0>;INFO: No memory detected in Bank 1
0>;INFO:   2048MB Bank 2
0>;INFO: No memory detected in Bank 3
0>;
0>;Data Bitwalk on Master
0>;      Test Bank 0.
0>;      Test Bank 2.
0>;Address Bitwalk on Master
0>;INFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.800000
00.
0>;INFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.800000
00.
0>;Set Mailbox
0>;Setup Final DMMU Entries
0>ost Image Region Scrub
0>;Run POST from Memory
0>;Verifying checksum on copied image.
0>;The Memory's CHECKSUM value is 9d6c.
0>;The Memory's Content Size value is 9067a.
0>;Success...  Checksum on Memory Validated.
0>;Safari quick check
0>;       to IO-bridge_0
0>;       to IO-bridge_1
0>;Safari full  check
0>;       to IO-bridge_0
0>;       to IO-bridge_1
2>;Safari quick check
2>;       to IO-bridge_0
2>;       to IO-bridge_1
2>;Safari full  check
2>;       to IO-bridge_0
2>;       to IO-bridge_1
2>robe and Setup Memory
2>;INFO:   2048MB Bank 0
2>;INFO: No memory detected in Bank 1
2>;INFO:   2048MB Bank 2
2>;INFO: No memory detected in Bank 3
2>;
2>;Set Mailbox
0>;Data Bitwalk on Slave 2
0>;      Test Bank 0.
0>;      Test Bank 2.
0>;Address Bitwalk on Slave 2
0>;INFO: Addr walk mem test on CPU 2 Bank 0: 00000020.00000000 to 00000020.800000
00.
0>;INFO: Addr walk mem test on CPU 2 Bank 2: 00000022.00000000 to 00000022.800000
00.
2>;Setup Final DMMU Entries
2>;Map Slave POST to master memory
2>rint Mem Config
2>;Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
2>;Memory in non-interleave config:
2>;      Bank 0   2048MB : 00000020.00000000 ->; 00000020.80000000.
2>;      Bank 2   2048MB : 00000022.00000000 ->; 00000022.80000000.
0>rint Mem Config
0>;Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
0>;Memory in non-interleave config:
0>;      Bank 0   2048MB : 00000000.00000000 ->; 00000000.80000000.
0>;      Bank 2   2048MB : 00000002.00000000 ->; 00000002.80000000.
2>;Scrub Memory
0>;Scrub Memory
2>;Quick Block Mem Test
0>;Quick Block Mem Test
2>;Quick Test 16777216 bytes at 00000020.00000000
0>;Quick Test 16777216 bytes at 00000000.00600000
0>;40% Done...
2>;Flush Caches
0>;Flush Caches
0>;IO-Bridge unit 0 init      test
0>;IO-Bridge unit 1 init      test
0>;IO-Bridge unit 0 reg       test
0>;IO-Bridge unit 0 mem       test
0>;IO-Bridge unit 0 PCI DMA A test
0>;IO-Bridge unit 0 PCI DMA B test
0>;IO-Bridge unit 0 PCI merg  test
0>;IO-Bridge unit 0 PCI iommu test
0>;IO-Bridge unit 0 PCI stc   test
0>;IO-Bridge unit 0 interrupt test
0>;IO-Bridge unit 1 reg       test
0>;IO-Bridge unit 1 mem       test
0>;IO-Bridge unit 1 PCI DMA C test
0>;IO-Bridge unit 1 PCI DMA D test
0>;IO-Bridge unit 1 PCI merg  test
0>;IO-Bridge unit 1 PCI iommu test
0>;IO-Bridge unit 1 PCI stc   test
0>;IO-Bridge unit 1 interrupt test
2>;IO-Bridge unit 0 init      test
2>;IO-Bridge unit 0 PCI merg  test
2>;IO-Bridge unit 0 interrupt test
2>;IO-Bridge unit 1 init      test
2>;IO-Bridge unit 1 PCI merg  test
2>;IO-Bridge unit 1 interrupt test
2>;FPU Registers and Data Path
0>;FPU Registers and Data Path
2>;FPU Move Registers
0>;FPU Move Registers
2>;FSR Read/Write
0>;FSR Read/Write
2>;FPU Branch Instructions
0>;FPU Branch Instructions
2>;FPU Functional Test
0>;FPU Functional Test
2>;FPU BLOCK REG TEST
0>;FPU BLOCK REG TEST
0>;
0>;Motherboard/Centerplane Board Part Number:
0>;      5015819-13-52
0>;IO/Riser Board Part Number:
0>;      5015820-04-54
0>;CPUA Board Part Number:
0>;      5016334-04-50
0>;CPUB Board Part Number:
0>;INFO: Unpopulated Slot
0>;Turn IO-Bridge 0 errors on
0>;Turn IO-Bridge 1 errors on
0>;Turn Cheetah 0 errors on
0>;Turn Cheetah 2 errors on
0>;Turn Module A DCDS errors on
0>;Turn DCS errors on
0>;Turn DAR errors on
0>;Turn error traps on
0>;INFO:
0>;      POST Passed all devices.
0>OST: Return to OBP.


CPU0: System Power On Selftest Completed
    Pass/Fail Status  = 0000.0000.0000.0000
    ESB Overall Status  = ffff.ffff.ffff.ffff


<*>;
POST Reset

@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Configuring CPUs..........
... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
         Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400
... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
         Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400 Done
<*>;
CPU Configuration Reset

@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Enabling Safari .......... CPU0 CPU2 Done
Probing Memory............
Probing CPU0 memory configuration
  NGDIMM#0 part# 501-5031-03 serial# 209512,  512MB + 512MB,  SC#0
  NGDIMM#1 no DIMM detected.
  NGDIMM#2 part# 501-5031-03 serial# 209511,  512MB + 512MB,  SC#0
  NGDIMM#3 no DIMM detected.
  NGDIMM#4 part# 501-6109-02 serial# 015130,  512MB + 512MB,  SC#0
  NGDIMM#5 no DIMM detected.
  NGDIMM#6 part# 501-6109-02 serial# 015135,  512MB + 512MB,  SC#0
  NGDIMM#7 no DIMM detected.
Probing CPU2 memory configuration
  NGDIMM#0 part# 501-5031-03 serial# 209509,  512MB + 512MB,  SC#0
  NGDIMM#1 no DIMM detected.
  NGDIMM#2 part# 501-5031-03 serial# 209510,  512MB + 512MB,  SC#0
  NGDIMM#3 no DIMM detected.
  NGDIMM#4 part# 501-6109-02 serial# 015129,  512MB + 512MB,  SC#0
  NGDIMM#5 no451KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot  CPU2 starting Forth at 0000.0000.f000.00e0

ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 Nothing there
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 Nothing tMemory Configuration:
CPU0 Bank0  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #0
CPU0 Bank2  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #2
CPU2 Bank0  512 +  512 +  512 +  512 :    2GProbing /pci@8,600000 Device 1  SUNW
,XVR-100
Probing /pci@8,600000 Device 2  Nothing there
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  pci
Probing /pci@8,700000/pci@4 Device 0  pci108e,1000 SUNW,hme
Probing /pci@8,700000/pci@4 Device 1  Nothing there
Probing /pci@8,700000/pci@4 Device 2  Nothing there
Probing /pci@8,700000/pci@4 Device 3  Nothing there
Probing /pci@8,700000/pci@4 Device 4  SUNW,isptwo sd st
Probing /pci@8,700000/pci@4 Device 5  Nothing there
Probing /pci@8,700000/pci@4 Device 6  Nothing there
Probing /pci@8,700000/pci@4 Device 7  Nothing there
Probing /pci@8,700000/pci@4 Device 8  Nothing there
Probing /pci@8,700000/pci@4 Device 9  Nothing there
Probing /pci@8,700000/pci@4 Device a  Nothing there
Probing /pci@8,700000/pci@4 Device b  Nothing there
Probing /pci@8,700000/pci@4 Device c  Nothing there
Probing /pci@8,700000/pci@4 Device d  Nothing there
Probing /pci@8,700000/pci@4 Device e  Nothing there
Probing /pci@8,700000/pci@4 Device f  Nothing there
Probing /pci@8,700000 Device 5  Nothing there
Probing /pci@8,700000 Device 6  ide disk cdrom
Probing /pci@9,600000 Device 1  network
Probing /pci@9,600000 Device 2  SUNW,qlc fp disk
Probing /pci@9,700000 Device 1  usb keyboard mouse
Probing /pci@9,700000 Device 2  network

Sun Fire 480R, Keyboard Present
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.10.8, 8192 MB memory installed, Serial #54832996.
Ethernet address 0:3:ba:44:af:64, Host ID: 8344af64.



Creating CPU memory layout properties.


Running diagnostic script obdiag/normal

Testing /pci@9,600000/SUNW,qlc@2
Testing /pci@9,700000/ebus@1/i2c@1,2e
Testing /pci@9,700000/ebus@1/i2c@1,30
Testing /pci@9,700000/ebus@1/bbc@1,0
Testing /pci@9,700000/ebus@1
Testing /pci@9,600000/network@1
Testing /pci@9,700000/network@2
Testing /pci@9,700000/usb@1,3
Testing /pci@9,700000/ebus@1/pmc@1,300700
Testing /pci@9,700000/ebus@1/rtc@1,300070


Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
Environmental monitor is ON
Resetting ...


<*>;
Firmware I/O Diagnostics Reset

@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Enabling Safari .......... CPU0 CPU2 Done
Init ICache/etc........... CPU0 CPU2 Done
Init ECache Tags.......... CPU0 CPU2 Done
Clearing TLBs............. CPU0 CPU2 Done
Setup I/DTLBs............. CPU0 CPU2 Done
Enabling Cache/MMUs....... CPU0 CPU2 Done
Init ECache Data.......... CPU0 CPU2 Done
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 96KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.9604.976f;  ROM CRC = 0000.0000.9604.976f
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.0b30 (451KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot  CPU2 starting Forth at 0000.0000.f000.00e0

ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 Nothing there
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 Nothing there
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device
   SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
   fru fru fru fru fru nvram idprom fru fru i2c temperature temperature
   ioexp ioexp ioexp ioexp ioexp ioexp ioexp temperature-sensor fru fru
   fru fru fru rscrtc rtc gpio pmc rsc-control rsc-console serial
Memory Configuration:
CPU0 Bank0  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #0
CPU0 Bank2  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #2
CPU2 Bank0  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #1
CPU2 Bank2  512 +  512 +  512 +  512 :    2GB @  a000000000  4-way #3
Probing /pci@8,600000 Device 1  SUNW,XVR-100
Probing /pci@8,600000 Device 2  Nothing there
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  pci
Probing /pci@8,700000/pci@4 Device 0  pci108e,1000 SUNW,hme
Probing /pci@8,700000/pci@4 Device 1  Nothing there
Probing /pci@8,700000/pci@4 Device 2  Nothing there
Probing /pci@8,700000/pci@4 Device 3  Nothing there
Probing /pci@8,700000/pci@4 Device 4  SUNW,isptwo sd st
Probing /pci@8,700000/pci@4 Device 5  Nothing there
Probing /pci@8,700000/pci@4 Device 6  Nothing there
Probing /pci@8,700000/pci@4 Device 7  Nothing there
Probing /pci@8,700000/pci@4 Device 8  Nothing there
Probing /pci@8,700000/pci@4 Device 9  Nothing there
Probing /pci@8,700000/pci@4 Device a  Nothing there
Probing /pci@8,700000/pci@4 Device b  Nothing there
Probing /pci@8,700000/pci@4 Device c  Nothing there
Probing /pci@8,700000/pci@4 Device d  Nothing there
Probing /pci@8,700000/pci@4 Device e  Nothing there
Probing /pci@8,700000/pci@4 Device f  Nothing there
Probing /pci@8,700000 Device 5  Nothing there
Probing /pci@8,700000 Device 6  ide disk cdrom
Probing /pci@9,600000 Device 1  network
Probing /pci@9,600000 Device 2  SUNW,qlc fp disk
Probing /pci@9,700000 Device 1  usb keyboard mouse
Probing /pci@9,700000 Device 2  network

Sun Fire 480R, Keyboard Present
Copyright 1998-2003 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.10.8, 8192 MB memory installed, Serial #54832996.
Ethernet address 0:3:ba:44:af:64, Host ID: 8344af64.



Creating CPU memory layout properties.

Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
Environmental monitor is ON
Rebooting with command: boot
Boot device: net  File and args:
Using Onboard transceiver - 100 Mbps FDX Link up
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet

metor78

键盘还是没有输入吗？？不会吧，看起来很正常呀！只是从网络启动了而已

bioleon

-o-
键盘按下numblock可以看见灯亮了
但是ctrl+d/stop+a/root passwd
偶的终端上面都没有显示变化，还是
Type control-d to proceed with normal startup,
(or give root password for system maintenance):

metor78

不用键盘呢？？？终端可以输入吗？肯定是你的终端的问题了

iricyan

可是怎么没有屏幕输出了呢？
楼主说是有屏幕输出的，开始的时候。
不过stop-n肯定又搞掉了。

换终端试试吧。

metor78

sun的领导支持偶了，兴奋ing

bioleon

原帖由 "iricyan" 发表：
可是怎么没有屏幕输出了呢？
楼主说是有屏幕输出的，开始的时候。
不过stop-n肯定又搞掉了。

换终端试试吧。

？
偶Oracle都装好了的说
就是init s ，reboot后就折了
reboot以后就没有屏幕输出了，奇怪就在这里了
stop+n也是后来才搞DI

metor78

先解决你的终端问题吧！现在看起来机器没有问题，你的终端设置有问题，要不换个sun的机器做终端试试，用机器带的那个15针的口，TTY上去看看

iricyan

恩，用它自带的大串口，25针的。连到SUN的机器看看。
不过那边需要改/etc/remote。
默认好象是 term/b，忘记了。