由于错误的关机导致的不能进入X的问题之解决方法

jwm

今天中午，由于运行一个程序导致死机，硬盘狂闪，任何按键均不起作用，我便直接按下电源键，结果导致重启后不能进入X,表现为在应该出现登陆的地方，屏幕不停地闪烁，就是不出现任何图像
在字符界面下使用startx进入时，依然不能启动X，并有如下提示
[root@localhost root]# startx
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority

XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com

        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.20-8 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 16:42:56 EST 2003
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb  6 14:53:48 2004
(==) Using config file: "/etc/X11/XF86Config-4"

/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: init_module: No such device
/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: insmod /lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o failed
/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: insmod sis failed
[drm] failed to load kernel module "sis"
(EE) SIS(0): [dri] DRIScreenInit failed.  Disabling DRI.
Could not init font path element unix/:7100, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

[root@localhost root]#
大家帮我看看是怎么回事呀

livelybear

是不是哪个字体坏掉了，如果有中文字体，把那个重
安一下，如果还不行，那安装Xfree86 base fonts.

只爱一点点

听人家说，linux下直接断电会损坏文件系统。

chenl

看看你得xfs服务有没有启动，
service xfs restart
然后startx
试试看

lichin

/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: init_module: No such device
/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: insmod /lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o failed
/lib/modules/2.4.20-8/kernel/drivers/video/sis/sisfb.o: insmod sis failed
[drm] failed to load kernel module "sis"
看来你的sis显卡的驱动模块丢失了，试着在命令模式下载一个显卡驱动重装一下，要么重新编译一下内核试试！