网卡没有办法激活！！请求帮助！！

bigsurge

insmod sundance.o

sundance.o: The module you are trying to load (sundance.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.


modprobe sundance试试

modprobe: Can't locate module sundance


是不是还要在/etc/modules.conf里再加一句alias eth0 模块名

alias usb-controller usb-uhci
options sundance irq=9
alias sound-slot-0 via82cxxx_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >;/dev/null 2>;&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >;/dev/null 2>;&1 || :
alias eth0 sundance

零二年的夏天

sundance.o: The module you are trying to load (sundance.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.

应该要重新编译这个驱动模块。

bigsurge

这个问题困扰我很久了，再次感谢~

bigsurge

原帖由 "零二年的夏天" 发表：

应该要重新编译这个驱动模块。

是需要make 什么？

bigsurge

[quote]原帖由 "chenjn"]放到这个路径的话,应该是需要重新编译内核的,至于怎么编译内核就......[/quote 发表：

bigsurge

高手呢？

bigsurge

还是上不了网呀！请高手帮忙！

bigsurge

sundance device eth0 does not seem to be present, delaying initialization.

xspeder

除了驱动，可以检查一下网卡的中断号，比如用11中断

bigsurge

想请教一下，我在家载驱动的时候总报这样的错误，要怎么做？谢谢！

insmod sundance.o

sundance.o: The module you are trying to load (sundance.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.