- 论坛徽章:
- 0
|
安装Veritas Volume Manager之后,还应该......
[quote]原帖由 "sharkbing"]这样行吗?rootvg 必须在安装vertias volume 之前安装[/quote 发表:
他的方法可行。不过他说的一种特例。这是将一个磁盘中的分区加入到rootdg中的办法,一般不推荐使用。也可以用整个根盘做rootdg,但也不推荐,只是在需要Mirror的时候使用。
一般的情况是使用vxinstall来创建rootdg 即可。以下是我的步骤。
# vxlicense -c
Please enter your key:
vxinstall:
# vxinstall
VxVM uses license keys to control access. If you have a SPARCstorage
Array (SSA) controller or a Sun Enterprise Network Array (SENA) controller
attached to your system, then VxVM will grant you a limited use license
automatically. The SSA and/or SENA license grants you unrestricted use
of disks attached to an SSA or SENA controller, but disallows striping,
RAID-5, and DMP on non-SSA and non-SENA disks. If you are not running an
SSA or SENA controller, then you must obtain a license key to operate.
Licensing information:
System host ID: 80f1049e
Host type: sun4u
SPARCstorage Array or Sun Enterprise Network Array: No arrays found
Some licenses are already installed. Do you wish to review them
[y,n,q,?] (default: y)
vrts:vxlicense: INFO: Feature name: VxVM [95]
vrts:vxlicense: INFO: Number of licenses: 1 (non-floating)
vrts:vxlicense: INFO: Expiration date: Sun Nov 24 16:00:00 2002 (43.1 days from now)
vrts:vxlicense: INFO: Release Level: 25
vrts:vxlicense: INFO: Machine Class: All
vrts:vxlicense: INFO: Feature name: RAID [96]
vrts:vxlicense: INFO: Number of licenses: 1 (non-floating)
vrts:vxlicense: INFO: Expiration date: Sun Nov 24 16:00:00 2002 (43.1 days from now)
vrts:vxlicense: INFO: Release Level: 25
vrts:vxlicense: INFO: Machine Class: All
vrts:vxlicense: INFO: Feature name: VVR [78]
vrts:vxlicense: INFO: Number of licenses: 1 (non-floating)
vrts:vxlicense: INFO: Expiration date: Sun Nov 24 16:00:00 2002 (43.1 days from now)
vrts:vxlicense: INFO: Release Level: 25
vrts:vxlicense: INFO: Machine Class: All
Volume Manager Installation
Menu: VolumeManager/Install
VxVM will use the following format to name disks on the host:
<enclosurename>;_<diskno>;
In the above format, <enclosurename>; is the logical name of the enclosure
to which the disk belongs. VxVM assigns default enclosure names which can
be changed according to the user requirements.
Some examples would be:
hitachi0_2 - second disk detected in enclosure 'hitachi0'
enggdept_2 - second disk detected in enclosure 'enggdept'
dgc1_1 - first disk detected in enclosure 'dgc1'
jbod_1 - first disk detected in the jbod category
For non-public loop disks (Ex. FC disks directly connected to the host
or through hubs), you could choose to use the c#t#d#s# naming format.
Do you want to use enclosure based names for all disks ?
[y,n,q,?] (default: n)
Volume Manager Installation
Menu: VolumeManager/Install
Volume Manager Quick Installation
Menu: VolumeManager/Install/QuickInstall/OTHER_DISKS/Encap
Use default disk names for these disks? [y,n,q,?] (default: y) n
Enter disk name for c0t1d0s2 [<name>;,q,?] (default: disk01) disk01
The c0t1d0 disk has been configured for encapsulation.
Enter disk name for c0t2d0s2 [<name>;,q,?] (default: disk02)
and reboot
这个好像是vxvm3。2的版本。 |
|