关于F80的内存配置规则

calcm

在F80的service guide上看到下面一段话：
One-Way Processor Memory Placement Rules
The rules for one-way processor memory are as follows:
Minimum memory is 1 pair of DIMMs in slots 1 and 8 (see “Processor Card Memory
DIMM Locations for Service Processor Menus” on page 270).
Maximum memory is 4 DIMM pairs in slots 1 through 8 (see “Processor Card
Memory DIMM Locations for Service Processor Menus” on page 270).
Each memory riser slot must have a memory filler card installed.
When you are installing a memory riser card:
– Memory DIMMs must be moved from the one-way processor card to the memory
riser card.
– The memory riser card must then have a minimum of 1 quad (four DIMMs).
这段是不是说如果配置了memory riser card，CPU卡上就不能安装内存了。或者说即使CPU板上插了内存，系统也认不出来。

baibj

是啊