- 论坛徽章:
- 1
|
把SCSI卡也要更改成对多LUN支持
You need to specify a larger number of targets than you have disks in the host zone to account for local SCSI disks. For example, if you have 30 disks in the host zone, you need at least 31 targets in sd.conf because there may be a local SCSI disk in the host itself. If a target has more than one LUN, you must list each LUN.
After adding disks to a host zone, you must check the host’s ability to see the disks, using the drvconfig and format commands. (After SANPoint Control is installed, you can use the Fabric Zoning tool or Array Management tool to do this automatically.) If you can
see all of the LUNs, the disks have been added successfully. If not, try rebooting the host and use format again. See your vendor documentation for details. |
|