xwindows界面不能启动!

andyren11

局域网里面有几台solaris服务器，通过防火墙映射的工网地址。现在我想通过外网用xwindows进入局域网里面的solaris服务器，请问要怎么设置？或是不是要在防火墙上做什么数据？

race

mapping on the router needs to be created that forwards incoming connections to port 6000+D, where D represents the display number (6000, 6001, 6002, etc), to the same port on the LAN machine that is running X-Win32. Refer to the owner's manual of your router for instruction on how to create the port mapping.

In addition, go to X-Win32 X-Config, under Display tab, click on "roxy" radio button and add your router main IP address for display. This should be the public IP address assigned by your ISP. By doing this, the host machines are told to send display to the NAT router instead of sending display directly to the private LAN, and the NAT router will re-route the display to the LAN machines