急，jumpstar安装为何无法找到硬盘？

dreamle

请教各位大侠了：
Rebooting with command: boot net - install                           
Boot device: /pci@9,700000/network@1,1  File and args: - install
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
2ae00
Requesting Internet address for 0:3:ba:2c:ed:76
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc.  All rights reserved.
whoami: no domain name
NOTICE: pcihp (pcisch3): card is powered on in the slot hpc0_slot8
NOTICE: pcihp (pcisch3): card is powered on in the slot hpc0_slot7
NOTICE: pcihp (pcisch0): card is powered on in the slot hpc1_slot3
NOTICE: pcihp (pcisch0): card is powered on in the slot hpc1_slot2
NOTICE: pcihp (pcisch0): card is powered on in the slot hpc1_slot1
NOTICE: pcihp (pcisch0): card is powered on in the slot hpc1_slot0
NOTICE: pcihp (pcisch2): card is powered on in the slot hpc2_slot6
NOTICE: pcihp (pcisch2): card is powered on in the slot hpc2_slot5
NOTICE: pcihp (pcisch2): card is powered on in the slot hpc2_slot4
Configuring /dev and /devices
cannot load system call for inst_sync
Bad System Call
Using RPC Bootparams for network configuration information.
Skipping interface ge0
Configured interface eri0
Searching for configuration file(s)...
Using sysid configuration file 10.10.10.50:/export/home/INPVAA756000-iserver/jumpstart/cscf/sysidcfg
The system is coming up.  Please wait.
Starting remote procedure call (RPC) services: sysidns done.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 10.10.10.50:/export/home/INPVAA756000-iserver/jumpstart/cscf.
Checking rules.ok file...
Using profile: cscf.conf
Using finish script: do_finish
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.

ERROR: No disks found
        - Check to make sure disks are cabled and powered up

好像从一开始初始化就没有找到本地的硬盘，这是为何？？？
Configuring /dev and /devices
cannot load system call for inst_sync
Bad System Call
谢谢！！！

race

OK查看一下，没有就开机箱检查吧

dreamle

这台机子是装了系统的，都起得来，而且硬盘一定是好的。是要重装的。不明白在jumpstar的时候会有这个问题