请帮忙看一行cisco路由器错误代码的意思，谢谢了

alon

00:00:44: %AMDP2_FE-5-EXCESSCOLL: Ethernet1/0 TDR=1, TRC=0

（cisco2610的）

xilun

Ethernet1/0端口太多冲突，可能因为网络负载太大引起的。

mazu

%AMDP2_FE-5-EXCESSCOLL : [chars] TDR=[dec], TRC=[dec]
Explanation ： Ethernet or Fast Ethernet is seeing multiple collisions. This condition may occur under heavy loads. If an interface fails to allocate a slot in which it can transmit its frame without another collision for 16 times, it will not retry the operation. The frame is not transmitted and is marked as an excessive collision.

Recommended Action ：  The system should recover. No action is required.