在配置router 2600+2MDDN专线时遇到的难题。

pdiunix

cisco 2600 (MPC860) processor (revision 0x100) with 28672K/4096K bytes of memory.

pdiunix

00:00:02: %LINK-4-NOMAC: A random default MAC address of 0000.0c82.4181 has
  been chosen.  Ensure that this address is unique, or specify MAC
  addresses for commands (such as 'novell routing') that allow the
  use of this address as a default.
00:00:06: %SYS-4-CONFIG_NEWER: Configuration from version 12.2 may not be correctly understood
00:00:10: %SYS-5-CONFIG_I: Configured from memory by console
00:00:10: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(3)T,  RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 19-Jul-00 16:02 by ccai


系统显示好象要12.2v的，可我不知道如何升级为12.2,也就因为我灌错了版本，如何进入到在 rommon 状态下。sq

百日鬼

你别给我看这个啊
你自己对照两种IOS的表格选用一种就是了
推荐选用后面一种（参考意见）

百日鬼

在rommon下只能用xmodom/ymodom来导了

pdiunix

我现在连copy tftp flash都用不了。

百日鬼

大哥啊在rommon模式下copy tftp flash当然用不了啊
我说过了啊，要用xmodom命令才行啊

pdiunix

是不是按ctrl+break

pdiunix

program load complete, entry point: 0x80008000, size: 0x487758
Self decompressing the image : ##############################################################################

pdiunix

Router#show interfaces

pdiunix

Erasing the nvram filesystem will remove all files! Continue? [confirm]
[OK]
Erase of nvram: complete